ek4 endlinks on dc2r swaybar

[RtN]

thanks vinny always a great help.

[tuyen]

thanks Vinny for the info. Stumbled into this problem just then. Have emailed ASR direct to get a set of inserts.

Hopefully all this trouble to get 23mm ITR bar to fit will be worth it over just getting a brand new 22mm EK9 bar!!

[vinnY]

yeah should work with the 23mm bar afaik, the ends should be no different

[tuyen]

I havn't got a reply from ASR yet..

so in the meantime I custom made some adapters lol



I noticed that the nut that holds the endlink in place doesn't have enough thread to go in fully. Have you noticed if yours becomes loose after a while? Just bit worried that's all.

Hopefully my sway bar doesn't fall off mid corner on the track

[vinnY]

well the asr spacers sorta recess into the bar a bit so it's no thicker, i'd say theres about 10-13mm of thread sticking out which seems to be adequate
if you're worried throw some loctite on and hope for the best