Page 1 of 2 12 LastLast
Results 1 to 12 of 16
  1. #1

    EK4 suspension setup

    i want to ask which is better...

    1. new springs with new shocks

    2. coilovers

    please consider the fact..im realli poor..hahaha so which works out cheaper.

    i just want a good drop with my 16s and not to rub the guards.

    please mention which brands would be good.

  2. #2
    Member Array
    Join Date
    Jun 2004
    Location
    ---
    Car:
    ekhatch
    do u want jus lower stance or...!?!??!
    cause if u want jus to make the car lower... just get springs... king springs around $400 for 4...

  3. #3
    i have king coil overs from fulcrum

    entry level coilovers... the car handles really well with 17s i can lower the back down to the rim...the front i can make the stock front bar tocuh the ground...these will set u back $2k plus fitting...

    better than just springs...the ride is firm not ruff

  4. #4
    or be a dumbo ride on jumboz...

    jumboz at moorebank in nsw if your in this state

    they will make custom springs

  5. #5
    but i heard someone telling me...springs will lower the car..but if u were gonna use stock shocks..it's not gonna last long
    that's why i dunno wat to do..i wont have enough money for the coilovers.

  6. #6
    well i was told
    (mind u this for my cxi at the time) that any lower than 2 1/2 inches u should replace the shocks... i got it 4 at the rear and 3 1/2 at the front... i had no shock travell in the rear... ur right it depends on ur budget... u just wanna cruize or do u wanna trash it through corners... well it will cost at least $400 correct me if im worng for lowered springs installed and wheel alighnment(i though it could get away with out doing and munched a two tyres in about a month and a half)

    how low do u wanna go... say u put 16s where do u want the gaurd to sit?

  7. #7
    Dude I understand that sometimes money is tough to come by......

    I personally would not worry about suspension and aim at improving other aspects of the EK4 ATM........

    Do you track the car at all or plan to do a fair amount of track work in the near future??

    Also what are the mods you have done so far?

    To put things into perspective.... I track my G/Fs EK4 quite often and from circuit racing to daily driving with the stock 7 year old suspension..... it was VERY competant on the track....... people actually where skeptical at the times I was getting with it....

    What I'm trying to get at is... if you eventually want to hit the track quite frequently, (which you should be with a nice car such as the EK4), and are more so concerned ATM with getting better handeling..... just save your money do other mods that don't cost an arm and a leg like your intakes and such........ then when the time comes that you have hit the bottleneck in handling performance..... go for the really nice suspension that you need and progress your driving skills from there.

    Notice I said "nice suspension that you NEED", not want....... like some people have already pointed out.... if you just want to lower the car no point going coilovers........

    All really depends what you want to acheive with the car........

    Soz for the novel...... I'm just passionate about EK4s and circuit racing.

  8. #8

    Wink

    well i guess money is realli important to me at the moment..so i wont be going for tracks.

    i just wanna lower the car so it looks good.

    i will be getting 16*7...

    i want the wheel and guard leaving no space or minimal space..so it doesnt look like theres a big gap.

    but i also dont want it to scratch the guards, as some ppl say it will scratch when too lowered.

    please advice me of this and also will the stock shocks be fine? or im not gonna race this car...

  9. #9
    Member Array
    Join Date
    Oct 2003
    Location
    Sydney
    Car:
    EK VTi-R
    hey ABC (i cbfed typing ur nick man ahaha).. my car has 16x7. the front is lowered 60mm, the rear 50mm. the front wheel has pretty much 1/2 finger gap, the rear about 2 finger gap.

    often when i take hard corners, my rim slightly hits the guard or the plastic lining! so if ur gonna do it for track, dun lower it too much !

    if ur just want a good drop, maybe some eibach sportline springs about 550rrp, or jdm kg/mm springs about 500-600 i think from one of the traders on the forum, or something liek whiteline flatouts, about 300 for a set of 4.

    btw: speedcore, u seem like another avid EK4 fan like myself!!! show us some pics of ur gf's EK dude ! !!

  10. #10
    I'll see what I can do...

  11. #11
    Moderator Array
    Join Date
    Jul 2004
    Location
    Sydney
    Car:
    s2k,ED,EG
    i had my springs from "jumboz" in moorebank i drop 2.5 at the front and 3 at the back when i had my 17's on. Now i use 15's and the stock shocks lasted 4 years but my car is a EK1 =) so dont know if there's any different between the Ek1 and EK4 suspension???

  12. #12
    do u think it'll be oright if i chuck in the 16s and leave the suspension?
    would it be real high?
    anyone got a pic would help ..thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.