emanage startup issue on reds

[MikeLary]

okay the topic may not be very descriptive but basically ive just upgraded to emanage and something slightly weird is happening in the sence that, if i leave the car on reds too long (engine off) - as in 5 minutes or so - then i goto turn the car on it doesnt turn on as if something is holding it back from starting , same sound as imobiliser ??

anyway what i have to do is jump the ecu error code wires and turn car off for a minutre or two then turn it on again and shes on

this happens only if i keep car in reds for 5 mins , then try turn it on, if i just turn car on it works....

any suggestions? i know this is weird so im not expecting it easily solved...

[Benson]

Sounds like the ECU. SAve yourself the hassle and get a hondata or a power FC

[MikeLary]

thanx for advertising dood but id rather fix this.

[TODA AU]

Is it cranking over & not starting or not even cranking?

[Lukezen27]

okay the topic may not be very descriptive but basically ive just upgraded to emanage and something slightly weird is happening in the sence that, if i leave the car on reds too long (engine off) - as in 5 minutes or so - then i goto turn the car on it doesnt turn on as if something is holding it back from starting , same sound as imobiliser ??

anyway what i have to do is jump the ecu error code wires and turn car off for a minutre or two then turn it on again and shes on

this happens only if i keep car in reds for 5 mins , then try turn it on, if i just turn car on it works....

any suggestions? i know this is weird so im not expecting it easily solved...

What error codes are you getting if any?

slow blinks = 10
fast blinks = 1

pulse long and short?
http://www.mohdparts.com/emanage/ins...des/index.html

[teaseR]

for some reason i cant do ecu check with my emanage.
nothing happens

[Lukezen27]

for some reason i cant do ecu check with my emanage.
nothing happens

Coze you now have a piggy back controlling the stock ECU maybe..

what do you need to do a check anyway?

Whats the problem?

[teaseR]

nothing... i use to run a check now and then just to see whether any sensor has played up

[Lukezen27]

nothing... i use to run a check now and then just to see whether any sensor has played up

Oh I see

Not sure then sorry mate

[MikeLary]

it cranks over like the car is about to start but it wont, as if the imobiliser is holding the car back from starting (just without the alarm noises ringing) this doesnt happen all the time, only if i have the car in reds for a bit then try start the car... which is weird...

no error codes.

[Lukezen27]

it cranks over like the car is about to start but it wont, as if the imobiliser is holding the car back from starting (just without the alarm noises ringing) this doesnt happen all the time, only if i have the car in reds for a bit then try start the car... which is weird...

no error codes.

Did the problem only just start or was it doing it from first install?

[MikeLary]

from first install.... i didnt have this problem with vafc... so im assuming emanage is doing something funny, i bet i wired something wrong, but then why would the car work good once its started :/

is there anything to note when wiring these babies up?