Page 3 of 6 FirstFirst 123456 LastLast
Results 25 to 36 of 66

Hybrid View

  1. #1
    Member Array
    Join Date
    Aug 2006
    Location
    murarrie
    Car:
    EG Si Hatchie
    Quote Originally Posted by beeza View Post
    You really described the effects of the bar really well!
    in tune with my car man.

    i really like the hammer finish paint. its the same sorta finish as toolboxes etc with that dimpled look. wanted a hard wearing finish cos it'll always be getting stepped on etc.
    Is this the end of my car modding days? Buying a house says so...

  2. #2
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Nice nice.

    Yeah my flat black paint it scratched where people's feet have been...

    I'll have to keep that paint in mind.Thank U!

  3. #3
    Member Array
    Join Date
    Aug 2006
    Location
    murarrie
    Car:
    EG Si Hatchie
    its bout 13 bucks from bunnings in the paint section with rust stopper etc. epoxy enamels are a 1 part enamel that is more durable than the usual export paints etc for $2 a can. i suggest a good etch primer too. always sand prime paint ftw
    Is this the end of my car modding days? Buying a house says so...

  4. #4
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    dude can you fix ur pics? i can't see? (maybe its the asian eyes?)
    I still gotta do mine but i've been lazy.....
    Evo IX - THE FINAL EVOLUTION

  5. #5
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    Use the Force Limbo!


  6. #6
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney - Cabramatta/Liver
    Car:
    Jazz EVO IX
    but that takes effort
    Evo IX - THE FINAL EVOLUTION

  7. #7
    Member Array
    Join Date
    Sep 2006
    Location
    Out in Nature
    Car:
    91 eg5 b16a
    hehehe

  8. #8
    Member Array
    Join Date
    Aug 2006
    Location
    murarrie
    Car:
    EG Si Hatchie
    yeah i can take some before work tomorrow. any particular thing you wanna see?
    Is this the end of my car modding days? Buying a house says so...

  9. #9
    Member Array
    Join Date
    Sep 2005
    Location
    South East Brisbane
    Car:
    96" VTIR Civic
    how solid would these things be in a side impact crash

    i've always wanted somthing like this for saftey purpose but thought that a single piece design would be stronger

  10. #10
    Member Array
    Join Date
    Sep 2005
    Location
    South East Brisbane
    Car:
    96" VTIR Civic
    Quote Originally Posted by jaybot View Post
    R u Guys trying to be funny? coz this is the single fuglyist mod i ever seen in my life... i honestly can't think any internal mods can be as ugly looking as this one. looks like some one chucked a random part of from a GYM machine in to the back of the car... TBH
    Quote Originally Posted by ek4-guy View Post
    how solid would these things be in a side impact crash

    i've always wanted somthing like this for saftey purpose but thought that a single piece design would be stronger
    Are you just stupid or are you playing dumb didn't you read my last post that was only 2 posts above yours

    The answer to your question is no I'm not trying to be funny I would actually be interested in something like this for saftey reasons. You see I have a 2 yearold son that I'm concerned about. My car being an ek4 there is no rear centre mounting point for a baby seat and this means he has to sit to the side. This worries me incase of a side impact accident as being on the edge there is no room for the body of the car to crush in

    Yes they may not look the best and yes I did call it's sexy but my comment was was more related to function (saftey) aswell as being polite

    So please don't mistake my politeness for arrogance or humour
    Last edited by ek4-guy; 30-12-2008 at 08:19 AM.

  11. #11
    Newcomer Array
    Join Date
    Dec 2008
    Location
    Sydney
    Car:
    FN2 type R
    Quote Originally Posted by ek4-guy View Post
    Are you just stupid or are you playing dumb didn't you read my last post that was only 2 posts above yours

    The answer to your question is no I'm not trying to be funny I would actually be interested in something like this for saftey reasons. You see I have a 2 yearold son that I'm concerned about. My car being an ek4 there is no rear centre mounting point for a baby seat and this means he has to sit to the side. This worries me incase of a side impact accident as being on the edge there is no room for the body of the car to crush in

    Yes they may not look the best and yes I did call it's sexy but my comment was was more related to function (saftey) aswell as being polite

    So please don't mistake my politeness for arrogance or humour
    1 If you are polit, you won't call other people stupid.
    2 my comment was only refer to how the bar looks and not how it function.
    3 I rly thought you guys were been funny. coz... functionality aside, this mods ain't a looker.
    4. for safty, this ain't going to imporve any thing, on a side impact, the bolts on both end could fly off, and you can get people who seat in the car hurt badly. you want do it right? go for a half roll cage. or for the safety of your son, get an accord or some thing.

  12. #12
    Member Array
    Join Date
    Nov 2007
    Location
    In the pit
    Car:
    A black one
    QUOTE=jaybot;2059689]1 If you are polit, you won't call other people stupid.
    2 my comment was only refer to how the bar looks and not how it function.
    3 I rly thought you guys were been funny. coz... functionality aside, this mods ain't a looker.
    4. for safty, this ain't going to imporve any thing, on a side impact, the bolts on both end could fly off, and you can get people who seat in the car hurt badly. you want do it right? go for a half roll cage. or for the safety of your son, get an accord or some thing.[/QUOTE]

    Jaybot u noob. Darryl ASKED if you were stupid, he didnt call you stupid. Now you are stupid and you look supid.

    Yes it doesnt look that good but im sure it would do the job its designed to do.
    Last edited by Gio; 31-12-2008 at 06:21 AM.
    Anyone selling a black ek1 facelift Hood (OEM)?? PM ME


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.