Results 1 to 11 of 11
  1. #1
    Member Array
    Join Date
    Sep 2007
    Location
    sydney
    Car:
    integra

    dc2 indicators not working

    hi i have a honda integra 1994 dc2 vtir.
    i was driving a couple of weeks ago when my indicators stopped working (when i clicked it, nothing happened).
    prior to this the indicators were flashing pretty fast (faster than a lot of other cars) so i thought its probably a fuse. but the hazard lights still work, so im not sure if its the fuse.
    if it is the fuse i was wondering where it is (in the engine bay or with the ignition fuses) also does anyone have a fuse diagram for ignition fuses as my integra doesnt have the sticker.

  2. #2
    Member Array
    Join Date
    Sep 2007
    Location
    sydney
    Car:
    integra
    oh yeah
    also need to know which fuse is for the cluster in the ingnition fuses
    thx

  3. #3
    have a look on the fuse box inside the engine bay or more then likely is the one under the driver dash... It will tell you which one is for the blinkers
    replace it with the same one I think its a 10 or so

  4. #4
    Member Array
    Join Date
    Aug 2005
    Location
    SYD
    Car:
    EG
    its a relay in the fuse box under the dash on the driver side

    its a square black box dats got "TURN" on it

  5. #5
    Member Array
    Join Date
    Sep 2007
    Location
    sydney
    Car:
    integra
    where are the relays?
    is it with the ignition fuses?
    i see two black boxed but none of them anything on the boxes.
    am i looking in th right place or not.
    theres 2 black boxes (one on the left side and on in the middle)

  6. #6
    Member Array
    Join Date
    Aug 2005
    Location
    SYD
    Car:
    EG
    its next to the steering column ... with all ur other fuses

    it says "TURN" on the side of the relay not on the top of it

  7. #7
    Member Array
    Join Date
    Sep 2007
    Location
    sydney
    Car:
    integra
    urm how many relays are there supposed to be?
    i can only see two and none of them have any writing on them

  8. #8
    Member Array
    Join Date
    Aug 2005
    Location
    SYD
    Car:
    EG
    if i remembered correctly .. its the one on the right had side .. just pull it out

    its held in buy 2 clip thingy on the sides ... if its says "turn" on it, u found it ... just like printed in paint kinda... not engraved or anything ... dont think u can just look at it and see " turn" ... so pull it out and see

  9. #9
    Member Array
    Join Date
    Sep 2007
    Location
    sydney
    Car:
    integra
    k thx samo
    bit late now to check
    ill do it first thing 2morro morning

  10. #10
    Member Array
    Join Date
    Sep 2007
    Location
    sydney
    Car:
    integra
    i pulled out both black boxes
    neither of them had turn on it
    both just had mitsuba 12v
    one was 3 plug while the other was a 4 plug
    are either of these right? (mayb replaced by previous owner)
    or am i looking in the wrong place
    as i cant find any other plugs in the dash fuse box

  11. #11
    Member Array
    Join Date
    Sep 2007
    Location
    sydney
    Car:
    integra
    is there any1 that can help
    really dont want to take it to an auto electrician

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.