Page 1 of 3 123 LastLast
Results 1 to 12 of 32
  1. #1
    Member Array
    Join Date
    Jul 2007
    Location
    Hill Valley
    Car:
    DMC-12

    Install EK9 Front Sway to CXI?

    hi guys

    what do i need to install an ek9 front sway to my cxi? I got the swaybar, bushings, brackets, endlinks, and the ek9 front control arms.

    Is that everything i need to bolt them on?

    thanks.

  2. #2
    Member Array
    Join Date
    May 2005
    Location
    Sydney
    Car:
    Swift ZC31s
    Yes, thats all you need. Have a look at the CXI lower control arm to check if the hole for the endlink is there. If the hole is there, no need to use the EK9 lower control arms.

  3. #3
    Quote Originally Posted by tank View Post
    Yes, thats all you need. Have a look at the CXI lower control arm to check if the hole for the endlink is there. If the hole is there, no need to use the EK9 lower control arms.
    not 100% -

    you need the 4 x 12mm headed bolts to hold the swaybar to the subframe
    Its done btw

  4. #4
    Member Array
    Join Date
    Jun 2006
    Location
    Brisbane
    Car:
    K20 DC2R
    ive got every part except those 4 bolts ><..u dont happen to know the exact size do u?

  5. #5
    Member Array
    Join Date
    Oct 2005
    Location
    Syd
    Car:
    Integra Type R
    if your ek1 already came with stock swaybars you can use the bolts that came with it already.
    mugen無限power

  6. #6
    Member Array
    Join Date
    Feb 2007
    Location
    SydN3Y
    Car:
    your mum
    Quote Originally Posted by Killa From Manila View Post
    ive got every part except those 4 bolts ><..u dont happen to know the exact size do u?
    u mean the D bracket bolts? if ur car had a swaybar on it before just use those, otherwise as ben said the head size is 12mm, i think the thread size is 7mm, and the length of the whole bolt is 2.5cm

  7. #7
    Member Array
    Join Date
    Jun 2006
    Location
    Brisbane
    Car:
    K20 DC2R
    cheers. mine being a cxi, neva came with front/rear sway bars

  8. #8
    midori Array
    Join Date
    Sep 2005
    Location
    south west!
    Car:
    EK4
    umm...

    isnt he talking about the front sway bar?

  9. #9
    Member Array
    Join Date
    Jun 2006
    Location
    Brisbane
    Car:
    K20 DC2R
    yes..and mine didnt come with a front swaybar. so i need to source them 4 bolts

  10. #10
    Member Array
    Join Date
    Dec 2003
    Location
    Sutho Shire y0. REZPECT
    Car:
    1998 BB6 Prelude VTiR
    Honda dealer will sell them, as will a wrecker if you specify. Hond ashould stock them, from memory the bolts are used elsewhere on the car.

    Does it have a rear?

  11. #11
    Member Array
    Join Date
    Feb 2007
    Location
    SydN3Y
    Car:
    your mum
    yeh the bolts are easy to come by.
    if u mean does the cxi have a rear swaybar, no. the cxi didnt come with any swaybars.
    if u mean are the rear swaybar bolts the same as front, yeh

  12. #12
    Member Array
    Join Date
    May 2006
    Location
    Los Angeles, CA
    Car:
    98 Integra Type
    This is the 26mm front sway, correct? You will also need the front strut forks from the EK9 or EM1. The EK9/EM1 front LCAs are of different design and you need the strut forks along with it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.