4 Lug ITR '96 Spec Brake Swap

[EG5]

bumping old thread because google redirect me to this page while looking for ek9 rear rotor height.
anyone can share some info for ek9/dc2r rear rotor offset/height?

thanks fellas.

Height : 48mm
Rotors thickness : 9mm
Centre Hole : 64mm

[mocchi]

holy mother of god. this guy! thanks a jumbo!

reason for asking is because im gonna order mg zs 180 rotors.
282x25mm front 4x100
rears are 260x10mm 4x100 height is 48mm too, looks like its gonna be sweet.

katman suggested me that rover rotors.

[nd55]

45mm offset rings a bell, but it's been a while.

Nick.

[EG5]

I can get rear rotors in 262mm in 4x100 for your application with dc2r/ek9 rear caliper.

[mocchi]

=o

are they re-drilled or in 4x100?
how much front and rear rotors boss?
im looking at about $350 for those rotors shipped from UK.
not sure with fitment for zs180 rear rotor.

[EG5]

=o

are they re-drilled or in 4x100?
how much front and rear rotors boss?
im looking at about $350 for those rotors shipped from UK.
not sure with fitment for zs180 rear rotor.

Not redrilled they are 4x100 from day 1
PM me and will discuss it.

[mocchi]

found out that rear zs180 aint gonna work.
need 4mm spacer and the disc is 4mm too thick. also issue with minimum thickness?
hmm.. wonder why itr can have 8mm min. thickness while zs180 have 11mm min. thickness?
maybe because of vehicle weight difference?

OEM ITR:
height: 48mm
min. thick.: 8mm
ori. thick.: 9mm
bore: 64mm

ZS180:
height: 44mm
min. thick.: 11mm
ori. thick.: 13mm
bore: 64mm