s2000 wheel offset & tyre help!

[Samm928]

sam
they will fit on the s2k but u will need to roll front and rear guards and relocate the rear tab.

now to answer ur question of camber, it depends wot type of look ur going for?
full tyres? (F:225/45 and R:255/40) or
ap2 spec tyres? (F: 215/45 and R: 245/40) or
stretched ish? (F:205/45 and R:235/40)
dont quote me on this, but stretchedish look will require at least -2.5 to 3*camber on the rears and about say -1.5 to 2* on the front
and obviously full tyres would need a bit more camber.

i'd go for ap2 spec tyres lol

im running -3* camber all round but 0 toe, toe is the main factor that kills tyre life yoo

your legendary...

[lzybum]

^^^
so watchya gona do sam?
put em on or what!? lol

[Samm928]

2x 18x8inch 40mm offset and 2 x 18x9inch 40mm offset

what tyres do i run at the back and at the front.
staggered rims..


not featuring dish.


i want it to look as oem as possible without too much camber.


<3

[tamay_s2k]

with that fitment it'll look nothing close 2 oem.
ur rim will poke a little it if u run stretch on the rear and ur tires will buldge out iif u dont run stretch
and the camber will be determined on how much u lower it

[lzybum]

2x 18x8inch 40mm offset and 2 x 18x9inch 40mm offset

what tyres do i run at the back and at the front.
staggered rims..


not featuring dish.


i want it to look as oem as possible without too much camber.


<3

i guess it depends how low u wanna go!
F 215/40 and R 245/35 (moar low needed lol)
F 215/40 and R 235/40

i'd say about -1.5* F and -2.5* R on camber
could try -2* rear but would need a roll of the guards too

[DBG]

Hey,

New to the forum and have done a HEAP of reading up!!

I just wanted to confirm 100% before purchase...

Will 18x8.5f and 18x9.5r with 39 offset all round fit ok? Happy to do some minor guard rolling and minor camber if required.

Was thinking 225 and 245 Tyres.

Thanks in advance for your advice.

Cheers

Ben

[vyets]

Hey,

New to the forum and have done a HEAP of reading up!!

I just wanted to confirm 100% before purchase...

Will 18x8.5f and 18x9.5r with 39 offset all round fit ok? Happy to do some minor guard rolling and minor camber if required.

Was thinking 225 and 245 Tyres.

Thanks in advance for your advice.

Cheers

Ben

Yeaps

[DBG]

Thanks heaps mate.

[greek_rambos2k]

i gave up with mine 17x8 40 and 17x9 42. hence selling them

[DBG]

i gave up with mine 17x8 40 and 17x9 42. hence selling them

Why is that? Too much work or wanted something different?

[greek_rambos2k]

Why is that? Too much work or wanted something different?

too much work. lol might have to sell the tyres too but hmmm tyring to get same size but diff offset

[vyets]

i gave up with mine 17x8 40 and 17x9 42. hence selling them

Here's my old setup

17x9 +40 on a 255/40 RT615. -2.5 degrees rear camber Roll + relocate bumper tab

1 hour to roll 1 hour to relocate tab no rubbing.