Page 3 of 26 FirstFirst 12345613 ... LastLast
Results 25 to 36 of 310
  1. #25
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney
    Car:
    Lotus Exige
    Quote Originally Posted by -parkes- View Post
    Potholes, cracks, road kill, uneven surfaces... I dodge them all Would hate to see how my car looks like from behind. People probably think I'm drunk LOL

    But seriously man your car is super lower especially the front. You must scrape a fair bit.
    well i have raised the front up abit. Also trimmed abit off the front air deflector as well. Apart from that its quite drivable. Its my daily driver. The only time i have problems is with huge speed humps and dipping driveways.

    Apart from that...its all good

    On a side note, the car looks alot better lowered imo.

  2. #26
    Member Array
    Join Date
    Oct 2004
    Location
    Sydney
    Car:
    ..S2000..
    i run the following..

    F:225/40 on a 18x8 +40
    R:255/35 on a 18x8 +40

    seem to have no problems.. but then again what was mention before about the camber and etc.. is really tru as im funning roughly about 3 degree neg camber on the rear.. car is lowered but not as slammed as FLYs.. though it does look hot lower...
    ..VTEC YO!..

    pure N/A all the way

  3. #27
    S2Krazy Array
    Join Date
    Feb 2005
    Location
    Brisbane CBD.
    ^

    Do you scrub with a 255 in the rear?
    --------------------------------------
    PM's Turned Off

    Prelude - Sold.
    S2000 - Sold.
    NSX - Sold.
    F355 - Coming...

  4. #28
    Member Array
    Join Date
    Feb 2006
    Location
    Brisbane Soutside
    Car:
    Em1 -> Dc2R --> Ap1
    Hey guys,

    I'm currently in the same position. Going to buy an s2k soon and found some hot looking wheels. However, the diameter of the rims are of two different sizes; does this pose an issue? Here are the specs of the rims:

    Fronts: 17 x 7 offset +35
    Rears: 18 x 9.5 offset +42

    Any help would be greatly appreciated.

  5. #29
    Member Array
    Join Date
    Aug 2005
    Location
    Sydney
    Car:
    S2000
    Hmmm, well the different diameters aren't really a problem but you may have trouble fitting a 9.5 inch wheel with a +42 offset under the guards.

  6. #30
    Member Array
    Join Date
    Feb 2006
    Location
    Brisbane Soutside
    Car:
    Em1 -> Dc2R --> Ap1
    ^ thanks for the quick reply. will the 7" upfront look too small?

  7. #31
    S2Krazy Array
    Join Date
    Feb 2005
    Location
    Brisbane CBD.
    I run a 8" rear +43 and it fits perfecto, but an extra 1/2" wider and same offset won't work IMO.
    --------------------------------------
    PM's Turned Off

    Prelude - Sold.
    S2000 - Sold.
    NSX - Sold.
    F355 - Coming...

  8. #32
    Member Array
    Join Date
    Sep 2003
    Location
    Sydney
    Car:
    AP2 S2000/CL9 Euro Lux
    I am running

    17X8 +45 with 225/45/R17 - front
    17X9 +63 with 245/40/R17 - rear

    I haven't driven it much yet as I just mounted them on. Rear looks fine but front is kinda sticking out a bit and by calculation it is 15mm extra. Hope it doesn't rub, but I think it will be fine with some coilovers and camber kit.

  9. #33
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney
    Car:
    Lotus Exige
    ^^ should be right. though fronts 225/40/17 should be fine. rear u can probably run 255/35/17?

    what wheels did u buy?

  10. #34
    Member Array
    Join Date
    Sep 2003
    Location
    Sydney
    Car:
    AP2 S2000/CL9 Euro Lux
    Quote Originally Posted by .::F[L]Y::. View Post
    ^^ should be right. though fronts 225/40/17 should be fine. rear u can probably run 255/35/17?

    what wheels did u buy?
    Was planning on running 255 in the rears but the place I bought the tyres from only had 245. I bought some Buddyclub P1 QF's and mounted them with Continental conti sport contact 3's.

  11. #35
    Member Array
    Join Date
    Aug 2005
    Location
    Sydney
    Car:
    S2000
    Blacks old wheels? Nice!

  12. #36
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney
    Car:
    Lotus Exige
    people, may i direct you attention to this thread

    http://www.s2ki.com/forums/index.php?showtopic=456737

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.