Results 1 to 8 of 8
  1. #1
    Newcomer Array
    Join Date
    May 2008
    Car:
    2008 Honda civic vti

    RCA output for 8th gen civic

    I am just wondering if the stock head unit of a 8th gen MY08 honda civic VTI (known as FD i think) comes with rca output?? Cause it has aux, i think there are chances that it might already have rca output for the stock head unit....is there???

  2. #2
    Member Array
    Join Date
    Oct 2006
    Location
    Hunter Valley NSW
    Car:
    lownslowsedan
    nope.

    you will have to tap into the speaker wires to get your feed
    to see all of my build, checkout


  3. #3
    Newcomer Array
    Join Date
    May 2008
    Car:
    2008 Honda civic vti
    sorry, wat do you mean?? tap into wat? to get wat??? lol

  4. #4
    Member Array
    Join Date
    Feb 2005
    Location
    Sydney
    Car:
    CBR600RR
    aux is for input.. to get an RCA output you need to use the standard speaker output (high output) and use converter to get a low output signal (RCA signal) that requires to drive your amps.

    Otherwise if your amp has high level inputs then you wont be needing the converter and just use the speaker output of the headunit as the high level signal input for the amp..

    I hope that explains things a bit

  5. #5
    Newcomer Array
    Join Date
    May 2008
    Car:
    2008 Honda civic vti
    http://www.rockfordfosgate.com/produ...5&locale=en_US

    Would the amp above have any chances to have wat you are talking about darkangel??

  6. #6
    Member Array
    Join Date
    Feb 2005
    Location
    Sydney
    Car:
    CBR600RR
    dont think that that amp has high level inputs.. so you will need a line out converter for it

  7. #7
    Member Array
    Join Date
    Mar 2007
    Location
    NSW
    Car:
    FD1 - RB1
    Quote Originally Posted by adylim View Post
    http://www.rockfordfosgate.com/produ...5&locale=en_US

    Would the amp above have any chances to have wat you are talking about darkangel??
    most of amp use high level output. rarely use low LO
    Big Brake Kit with Slotted rotor and Braided Line for FD
    http://www.ozhonda.com/forum/showthr...009-Direct-Fit

  8. #8
    Member Array
    Join Date
    Feb 2008
    Location
    Hornsby
    Car:
    EP3R
    buy a high to low converter...

    if you look at my DIY of my type r it works the same way as that..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.