1996 civic vtec twin turbo

**civic_ESH** · 27-05-2008 10:30 AM

Hi im Dr. Richard .H
I have a 96 honda civic vtec twin turbo

I currently run the car at 21 psi of my apexi boost control. To go with my twin turbo Garret GT35 set-up, i have added a Mugen turbo back exhaust and a Rajab Racing alloy intake plenum. I added a Whiteline suspension package consisting of adjustable panhard rods, strut braces, swaybars, tien coilovers, and a complete set of Rays Engineering wheels, running Nankang rubber at the front, and Falken semi-slicks on the rear. I have a ARC intercooler cooling the engine and turbos at a rapid pace, as well as a Henkei oil and transmission cooler, which i pack with dry ice when at the track. I have a stage 3 Cam kit from Crow Cams, with a modified and strengthened bottom end. The engine has been bored out to 2.2 litres and forged pistons top off the engine package. The interior is topped off with an artic blue coloured dash, with a set of Defi gauges. Also I recently invested in Bride Racing Seats, with a Momo gear knob and steering wheel, with a short shifter kit, making my throws unique. This all runs through a DPC triple plate clutch, which i guarantee no woman could push. The AWD conversion runs through a rear mini-spooled differential with 4.43:1 gear ratio. The "Maniac" bodykit from Takishi Fibreglass in Japan, and custom "Candy Ghostdrop Navy" paint top off the exterior package. I just added a CAI, it boosted me about 9kw and i have the dyno sheet to proove it. I'll add some pictures from my feature with "Performance Circuit", a Japanese circuit racing magazine. As well as a dyno sheet showing my 320kw package in action.

Cheers,
Chard

**rawr** · 27-05-2008 10:34 AM

i call bullshit

but welcome to the forums anyway

**civic_ESH** · 27-05-2008 10:37 AM

Originally Posted by rawr

i call bullshit

but welcome to the forums anyway

I understand your claim but i assure you i do not lie about my pride and joy

**rawr** · 27-05-2008 10:38 AM

What AWD system did you place in your car or was it custom fabricated

**civic_ESH** · 27-05-2008 10:40 AM

Its a custom fabrication done by PDR diff and driveshaft, they used a 99 RX subaru system in, the modified it for my car

**DA9B18C** · 27-05-2008 10:42 AM

i want pics!

**Gio** · 27-05-2008 10:44 AM

A lot of work put in just to bullshit BUT are those your Rays Engineering wheels in ur avatar LOL.

Welcome

**Zdster** · 27-05-2008 10:45 AM

Welcome. What block are you running?

**SHOGUNOVDDRK** · 27-05-2008 10:46 AM

Hi welcome to ozhonda

My name is Lloyd and the local spammer

Your car sounds 50.51CK and the any pics available?

Dont worry about Rawr he is just gonna HVACRY

I always tell him DNT-CRY but he says NO U

btw which state are you in?

I run the monthly meet and greet for sydney so if you are feel free to swing past next thursday

Toodledoo