I'm selling my Tein Monoflex for EK9. They are too bumpy even at the softest settings for me on the street. But the handling is like a go kart. I've opted to go back to TEIN SS since I had these since NEW for about 3000kms and sold them for the NEW Monoflex. Now... I've had the monoflex for 3000kms and have ordered brand new SS with upper mounts and EDFC. SS is really good for replacing your Stock Suspension. They are slightly stiffer than the Stock Type R except you can make them more stiffer ofcourse.
I recommend SS for the Street and Monoflex for the track. The Flex is just only 1kg less in spring rate with the monoflex except mono ofcourse is mono tube which is much better for the track.
Exactly the same situation as me. I tried monoflex =too stiff for daily..now Im using CUSCO ZERO 2 big thumb up
I'm selling my Tein Monoflex for EK9. They are too bumpy even at the softest settings for me on the street. But the handling is like a go kart. I've opted to go back to TEIN SS since I had these since NEW for about 3000kms and sold them for the NEW Monoflex. Now... I've had the monoflex for 3000kms and have ordered brand new SS with upper mounts and EDFC. SS is really good for replacing your Stock Suspension. They are slightly stiffer than the Stock Type R except you can make them more stiffer ofcourse.
I recommend SS for the Street and Monoflex for the track. The Flex is just only 1kg less in spring rate with the monoflex except mono ofcourse is mono tube which is much better for the track.
Tein SS don't have height travel adjustment which means when you lower Tein SS you're losing shock travel. I forgot the actual term to use here. This is the only reason I won't consider SS. Are MonoFlex THAT harsh? I can't imagine they are unbearable on lowest setting.
Buddy Club Race Spec is harsh, but they have bad reviews on ht, so I think I'll staying away. Cusco Zero2 is always good and probably gonna be my best choice.
My tein Flex's (on my 5th gen lude) are a great shock but imo are to soft and I spent a LONG TIME testing preload, damping, front n rear bias etc... I've tightened the rears preload up but I still have to much roll.. it dives hard into corners.... even with my sway bar on medium, comfort wise they are great but Im going up to a hevier spring.
n for peoples knowledge to rid understeer and create oversteer you tighten the rear up more than the front..
BB6 Prelude H22A4 CP 11.5:1 pistons, eagle rods, shaved deck 12.3:1 comp, Type S cams, lovefab header, s200, 65mm TB, 2.5" through... NA WARRIOR
i agree running tein monoflex on my euro bloody bumpy as but then sometimes it feels too soft.
would it be ideal to preload your springs?
and if so whats the most comfy setting slightly looser springs?
Set your preload based on the preload in the installation manual. It tells you to measure the height of the lower perch and set it to factory spec, and then after that you adjust height based on the lower mount.
Bookmarks