HID HB4 kit

[TRUMAN]

hey guys just wondering if you've guys came along this problem where u see some connections that u think wont have any spot in the car.. ive just purchase a kit and i just want to see whether anyones come across these connections in the kit.. and would it be ok to not use this connection and leave it out.





hope u guys can help.
More pics of the kit


above is the wires coming from the bulb


this is the ballast so thats the whole kit in all the pics..

[bungsai]

looks like you have a kit (well loom at least) for H4 bulbs there sir.

Post pics of the bulbs.

The three prong plug is for one H4 connector.

Ther other little clip is for the switching mechanism on the bulb.

[TRUMAN]

pics of BULB added

[bungsai]

i think you have the right bulbs and the wrong loom.

You are sposed to be able to plug that three prong thing into your original wiring loom in your car. The hb4 prong is only twin pronged whilst that one you show is triple pronged (h4). The extra prong on the H4 kit is the on off switch for the high beam signal.

The extra plug that you cant identify is for the switching mechanism and delivers this extra on off signal to the bulb so that your high beams still work. Obviously as hb4 is low beam only, this isnt necessary, which leads me to believe you have the wrong loom.

[Bludger]

I think I know what the problem is.

the item inside the yellow circle is for the signal to power the HID kit, on and off

it should plug into your stock headlight sockets which plug into the original bulb

the problem is that they have given you a H4 socket, not a HB4

get back to the person who supplied it to you and kick their ass

[TRUMAN]

ohhh Poo!!

[TRUMAN]

ok.. so ive talked to the person who's sold me the HID.. and the Loom wasnt suppose to be in the kit.. so it was plug and play.. but it wont work? wats going on?? could it be a faulty Kit?



this was how the kit suppose to look once all connected.. the loose bit connects to the oem harness of the DC2R.. and that was how i did it too.. and this was wat the seller sent me.. the installtion should look like that.

[Bludger]

ok.. so ive talked to the person who's sold me the HID.. and the Loom wasnt suppose to be in the kit.. so it was plug and play.. but it wont work? wats going on?? could it be a faulty Kit?



this was how the kit suppose to look once all connected.. the loose bit connects to the oem harness of the DC2R.. and that was how i did it too.. and this was wat the seller sent me.. the installtion should look like that.

If you have what is in that picture, you should have no problems

sort this out with the supplier

[iversonruls]

probably faulty kit...
did u hear any sound from the ballast when its switched on??

[Bludger]

probably faulty kit...
did u hear any sound from the ballast when its switched on??

don't give him false information

he can't plug it in, how can he turn it on???

hes got a h4 plug, instead of a hb4

[TRUMAN]

If you have what is in that picture, you should have no problems

sort this out with the supplier

yea i did this setup on my car.. and nothing works.. no sound from ballast etc.. only lights that are workin are the parkers and high beam. =(

[Bludger]

yea i did this setup on my car.. and nothing works.. no sound from ballast etc.. only lights that are workin are the parkers and high beam. =(

plz take actual pics of what you have actually done to your car, it will help us rectify your problems