Engine click after too much reving

[string]

Old Honda injectors make noise, it's a fact. Tick tick tick tick tick tick tick get used to it ha ha

[fitvpower]

mine's quite new 35000, just tick cause of too much reving lol. surprised if the injectors would clogg this early

[OMG.JAI xD]

mine's quite new 35000, just tick cause of too much reving lol. surprised if the injectors would clogg this early

its ure tappets dude -.-"

read previous comments.
hondas usually get tappet recheck at 40k's

you have 35000.
and a ticking noise.

it kinda screams. hey my tappets need adjusting. since you fit in the kilometre mark and complaint description.

go to a "good mechanic place" as some have said or go to a dealer.

dont diy if you dont know whats involved in taking a rocker cover off.
head gaskets are for the cylinder head.
thats where the cams sit.
and on that .. are the rockers.
the rocker cover.. covers all that.

fork out a few dollars on getting it fixed.
rather than trying to do it yourself and spending money on broken parts.


an engine wont be quiet quiet.
only quiet engine is hybrid.
a normal engine has fans, alternators, and a/c rotating ..
but thats out of the topic.
in engine wise.
you have the injectors, sparks, combustion, exhaust resonance, induction, and probably a bit more.
but youll never get a silent engine.
and a "tick" isnt always from one thing.

and if you want it fixed. start with the most common/basic. in this case .. tappets.


=] have fun.

[fitvpower]

cheers jai, ur right i should take it to a mechanic, having adjusted urs, could you give me a price quote for a tappet readjustment?.

btw. nice lights on ur eg, looks like a prelude

[aaronng]

its ure tappets dude -.-"

read previous comments.
hondas usually get tappet recheck at 40k's

you have 35000.
and a ticking noise.

it kinda screams. hey my tappets need adjusting. since you fit in the kilometre mark and complaint description.

Do you think this engine in this video needs to have the valve clearance checked? http://www.youtube.com/watch?v=4K3dky-zs1Y

[fitvpower]

hmmm, aaronng, so is that engine in the vid need readjusting, my engine does NOT sound like that. there is sound but not that pronounced. so is mine a valve problem or something else

[aaronng]

hmmm, aaronng, so is that engine in the vid need readjusting, my engine does NOT sound like that. there is sound but not that pronounced. so is mine a valve problem or something else

Something else. Because in that vid is my car. I brought it to the dealer for a valve adjustment, they took it apart and found that everything was still good. The valve clearance was still within spec and there was nothing to adjust! It was the injectors making that tapping sound. When your valve clearance needs adjusting, the engine will sound like a diesel. It doesn't "tap".

[Limbo]

i adjusted my tappets and the engine was quieter, the tapping noised reduced quite abit

[fitvpower]

well here's the video <object width="425" height="350"> <param name="movie" value="http://www.youtube.com/v/uxHK2di3adM"> </param> <embed src="http://www.youtube.com/v/uxHK2di3adM" type="application/x-shockwave-flash" width="425" height="350"> </embed> </object>

[fitvpower]

http://www.youtube.com/watch?v=uxHK2di3adM


look at 6 seconds, and onwards, looks like the sound is comming from that region. i'm too noob to be exact. any of you teckies got ne ideas?????

[mercury]

don't stress out yet, it could be as simple as a loose bolt get a compression test done you can by a tester for around $60 at repco or a supercheap
looks like this:



and follow this diy
comp test

if you get good numbers then you no its not your pistons or valves and you can move on from there.

(it could also be your tray has a broken tooth on one of the cogs

+1 i agree for a comp test

[aaronng]

http://www.youtube.com/watch?v=uxHK2di3adM


look at 6 seconds, and onwards, looks like the sound is comming from that region. i'm too noob to be exact. any of you teckies got ne ideas?????

Sounds a bit like my engine. Except that mine is louder.