Page 1 of 2 12 LastLast
Results 1 to 12 of 19

Thread: Turbo kit

  1. #1
    Newcomer Array
    Join Date
    Apr 2008
    Location
    Brisbane
    Car:
    97 Honda Integra VTiR

    Turbo kit

    I want to turbo my car at the end of the year and I want some advice. I have a Integra VTiR with 120k on the clock and I want about the 150KW ATW. What turbo kit would do that?

  2. #2
    Member Array
    Join Date
    Aug 2007
    Location
    Sydney
    Car:
    Choo Choo shoe.
    any decent ones.
    you probably can achieve that running stock internals with 7-10 psi.

    if you want to be on the safe side, go get the forged components.


    just dont forget the ecu.
    biggest gains come from that one component =]

  3. #3
    Member Array
    Join Date
    Apr 2007
    Location
    Sydney
    Car:
    Accord Euro 2003
    how much would a turbo kit plus all labour and stuff cost for a integra VTIR?
    Quote Originally Posted by kazam View Post
    lol give him a break, this is after all a forum and not just a giant search engine.. what are we gunna do when evry topic has been covered? disable posting and just have the search button there?

  4. #4
    Ozhonda Supporter Array
    Join Date
    Jul 2004
    Location
    Brisbane
    Car:
    MV Agusta F4
    No need to forge internals. Stock motor is fine.

    Get a decent turbo kit and don't go cheap.

    Peakboost
    AFI
    Full Race
    Love fab etc
    Or put your own kit together
    Deano.

  5. #5
    Member Array
    Join Date
    Jul 2006
    Location
    Melbourne
    Car:
    MX83 cressida
    Quote Originally Posted by OMG.JAI xD View Post
    any decent ones.
    you probably can achieve that running stock internals with 7-10 psi.

    if you want to be on the safe side, go get the forged components.


    just dont forget the ecu.
    biggest gains come from that one component =]

    If you want to "be on the safe side" then make sure you spend some $$ on stopping and steering before you pull 150ATW!!
    I would be looking at some bigger sways, stiffer springs and AT LEAST an upgrade to higher performance break pads!!

  6. #6
    Newcomer Array
    Join Date
    Apr 2008
    Location
    Brisbane
    Car:
    97 Honda Integra VTiR
    Quote Originally Posted by Kiz_EG6 View Post
    If you want to "be on the safe side" then make sure you spend some $$ on stopping and steering before you pull 150ATW!!
    I would be looking at some bigger sways, stiffer springs and AT LEAST an upgrade to higher performance break pads!!
    Yeah, doing that first got the sway bars and stud brace done, only need endless pads and a goos set of coilovers!

  7. #7
    Ozhonda Supporter Array
    Join Date
    Jul 2004
    Location
    Brisbane
    Car:
    MV Agusta F4
    Brakes sussy and safety is all good. But hes asking advice about turbo kits.
    Last edited by DLO01; 14-07-2008 at 09:46 PM.
    Deano.

  8. #8
    Member Array
    Join Date
    Nov 2006
    Location
    Jimboomba, QLD
    Car:
    The Moving Kind
    Quote Originally Posted by OMG.JAI xD View Post
    just dont forget the ecu.
    biggest gains come from that one component =]
    i wouldnt class it as a gain, more as a must have ecu is very important, drive the car without a tune and u will **** up something. some kits will come with its own emanage with a base map and tune, these will only work if u use the parts of that kit, if u dont it will throw that tune off

    for a custom kit i would be looking into something like hondata

  9. #9
    Member Array
    Join Date
    Sep 2004
    Location
    Western Sydney
    Car:
    Twisted
    AVO kit will get you 150kw@wheels
    ievaq8 is selling one cheap, check the for sale section

  10. #10
    Member Array
    Join Date
    Jan 2008
    Location
    brisbane - carindale
    Car:
    2003 JAZZ
    go the greddy kit..i have been researching kits for a few months now so i got a pretty bleak knowledge but i know it comes with just about everything and u can always (easily) upgrade parts of that kit so ur happy it will be reliable (like injectors, oil lines, bov etc)

    im plugging it in my car over the next 6months as im about to start my license suspension....

  11. #11
    Member Array
    Join Date
    Dec 2005
    Location
    Point Cook, VIC
    Car:
    EK1 CXI
    Quote Originally Posted by STOCK View Post
    AVO kit will get you 150kw@wheels
    ievaq8 is selling one cheap, check the for sale section
    thanks STOCK

    i have pm'd him already and for 150kw i told him it will make it easy on this kit

    upto him....but thanks for the recommendation

  12. #12
    Member Array
    Join Date
    Sep 2006
    Location
    Melbourne
    Hearing good reports on the US DRAG turbo kits.

    Raceinspired have the following kits

    http://www.raceinspired.com/showSect...nufacturerID=0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.