Konis on stock springs

[JamB]

Hey has anyone got konis installed on stock springs, mines dc2 to be specific
i was wondering if the springs were to be installed on the lowest perch on the konis, how much would it lower the car? i've searched but i cant find anything on this

[CRXer]

its something like 1 inch front & rear,maybe a little less on the back

i should add,thats if your getting koni yellows

[Mugen Civic]

by memory its 1.25 inches

for a more accurate idea, just put a ruler on the perches and measure the drop or raise.

i think for dc2:
Front set, there are three perches and the middle perche is the stock height.
Rear set, there is only two perche and the top one is the stock height

[CRXer]

2 on front,top stock
3 on rear,middle stock

[JamB]

yeah they are koni yellows, thanks guys

[bennjamin]

yeah they are koni yellows, thanks guys

so you can choose the amount of drop. From "around" stock height to alittle lower.

[twing]

I have koni yellow with oem spring on my civic.
On stock perch and still have a big gap on wheel.

I'm not dropping my ride anyway. On it's softest setting, it's firm enough (for me). I notice dive/squat has been reduced significantly compare to oem dampers.
a great mod...

[hondavti25]

Would theses drop an ej8 to low if it already has king springs? been looking into this option to

[twing]

yes.. you can go lower, like what crxer said.
Koni yellow has 2 perches on front damper and 3 at the back.
When you purchase them, koni use the top perch at the front and the middle perch at the back.
Have a read on:
http://www.ozhonda.com/forum/showthr...i+perch&page=2
http://www.ozhonda.com/forum/showthr...ght=koni+perch