Results 1 to 10 of 10
  1. #1

    '03 DC5 Intakes for Type R

    What are the available intakes for a '03 DC5 Type R under $400!

  2. #2
    Member Array
    Join Date
    Aug 2005
    Location
    Wagga Wagga NSW
    Car:
    DC5R
    nothing worth buying! unless you score a second hand injen

  3. #3
    Member Array
    Join Date
    Mar 2006
    Location
    melbourne
    Car:
    type R
    another 100 you can get a brand new injen bang for buck!!! or else if u can found a second hand one.....

  4. #4
    Member Array
    Join Date
    Jul 2005
    Location
    Sydney, WPH
    Car:
    Integra DC5 Type R '03
    spoon foam filter? mugen foam filter? greddy foam intake?
    '03 Integra DC5 Type R

    Wakefield Park: 1:13.047 w/ street tyres
    Eastern Creek Int'l Raceway: 1:57.969 w/ street tyres
    Power: 155Kw with Mugen N1 ECU

  5. #5
    Member Array
    Join Date
    Nov 2006
    Location
    Melbourne
    Car:
    DC5, EF8, EF2
    You should be able to get an Injen for around 400 shipped from the US if you find a seller in the US willing to ship it economically.

  6. #6
    Member Array
    Join Date
    Apr 2006
    Location
    Melbourne
    Car:
    Clio RS197
    As others have stated you won't find a "full replacement" intake for less then $400 new... that is worth buying.

    either:
    - Buy a replacement filter and do "Hondata airbox mod" (google it)
    - Keep an eye out for 2nd hand Injen intake (make sure it comes with the washer bottle)
    - Import the intake yourself from the states (Aus $ is VERY good at the moment)

    Good luck

  7. #7
    Member Array
    Join Date
    May 2007
    Location
    Melbourne
    Car:
    DC5R
    mugen ftw

  8. #8
    The owner purchased the F5 Air Fujita. $420 very nice looking intake. Took about 5 hours I took my time as I like to do things neat and tidy. I do something then I don't like it i change it again.

    Dislikes -

    The instructions.
    Have to remove front bumper
    Have to cut the splash guard for the piping to feed through.
    Have to remove the brake ducting pipe so there is room for the Air filter.
    Have to replace the washer bottle - Now I had big problems with this, the holes where the 2 motors go, had to be made bigger.
    The washer bottle funnel wouldn't fit in the entire way, as its slightly thinker then the stock,
    the grove where its meant to sit didn't go in the entire way, got it in as much as I could and put silicone around it just in case..
    Then bolting the bottle into position, the washer bottle is thicker then stock and the bolts didn't reach,
    had to use a electric sander to sand down the areas where the bolts fed through.
    Re-assembly on the left hand side underneath plastic didn't reach, the two bolts when re-assembling the front bumper underneath,
    due to the filter being so big, you can cut the plastic section out but then when it rains you'll get water onto the filter,
    so what I did was cable tie it back as close as possible and it actually came out good.

    Likes -

    Price.
    Apparently there are some performance gains like 7kw.
    Looks good & it feels of good quality.
    SOUNDS FREAKIN MEAN@!!!!!

    As I did this for a friend the end result was good he was very happy,
    but it took time and I encountered more hiccups then I would of liked I was about to bash the water bottle at one stage,
    now going through the rev range it sounds normal until you hit around 4grand....
    then 6 grand BOOM the thing just sounds like its going to rip its freaking guts right out of itself....
    both inside and outside it sounds good,I wasn't expecting it to sound this loud!

    I like how it sounds but I didn't enjoy installing it.
    Last edited by STAiN MASTER; 01-08-2008 at 08:00 AM.

  9. #9
    Ozhonda Trader Array
    Join Date
    Aug 2003
    Location
    Sydney.
    Car:
    EGK24A

    Stock DC5R VS Stock DC5R with INJEN CAI

    Stock = red line
    Stock with DC5R cai = blue line
    JDMyard Pty Ltd
    25 / 317-321 Woodpark Rd , Smithfield , NSW 2164. Contact : 02 97572364
    Email : yonas@jdmyard.com , Facebook : http://www.facebook.com/JDMYard
    www.JDMyard.com

  10. #10
    I was going to get the injen but you guys didn't have stock and the owner wanted to do it right away so it was his decision to go for the Fujita which was in stock.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.