[CL9] Ingalls Rear Camber Kit

**kingfoo** · 25-07-2008 07:16 AM

Hey all,

I just got the Ingalls rear camber kit for my CL9 from the US and was wondering if anyone had pics of their ones installed. I have a feeling I might have got the wrong one.

Thanks in advance.

**Crapdaz** · 25-07-2008 07:55 AM

Originally Posted by kingfoo

Hey all,

I just got the Ingalls rear camber kit for my CL9 from the US and was wondering if anyone had pics of their ones installed. I have a feeling I might have got the wrong one.

Thanks in advance.

hey sorry cant provide you with pics cause im still recovering from surgery.

But what part number did you get from the boxes? they should be these ones part no. 38725

http://www.heeltoeauto.com/Ingalls-C...-pr-50002.html

You need 2 lots of these to be able to fit onto your car as you have two sides.

1 arm - longer in length is for toe arm adjustment (the 1st arm you see underneath the car closest to the rear)
2 arm - shorter in length is for camber adjustment (arm is further in and slightly higher up)

BTW This has been covered before about the camber kit. Just need to do a search and when looking for camberkit you should be looking at Part no. and for TSX

Hope this helps.
Darren

**achia** · 25-07-2008 10:25 AM

Hmm.. I want to order a set too but i notice some of them has a different part no.

This one show the installation diagram has 2 arm and one for each side. I would assume that this will only adjust camber setting but not toe.

http://cgi.ebay.com/ebaymotors/_Car-...em180269011407

This one show the installation diagram has 2 arm for each side and I would assume that this will be able to adjust the camber and toe.

http://cgi.ebay.com/ebaymotors/_Car-...em330255105149

**Crapdaz** · 25-07-2008 12:43 PM

I think those two links you posted up are the same ingalls only comes 2 arms for 1 kit(1 side).

2 arms (1 kit) will make it easier for the alignment guy to deal with it as toe gets affected by camber adjustment + vice versa.

**kingfoo** · 25-07-2008 05:49 PM

Originally Posted by Crapdaz

Hope this helps.

It certainly did. I do have the correct ones. What made me question it was when I looked at my rear suspension and could only see where one of the arms would go.

Thanks heaps.

**kingfoo** · 25-07-2008 05:52 PM

Originally Posted by achia

This one show the installation diagram has 2 arm for each side and I would assume that this will be able to adjust the camber and toe.

http://cgi.ebay.com/ebaymotors/_Car-...em330255105149

^^^ That's who I got mine from, Import Auto Performance. I purchased it through their website though, http://www.iapdirect.com, as opposed to Ebay. With shipping and currency converted to New Zealand dollars it was alot cheaper then getting it from an Aussie supplier.

**aaronng** · 25-07-2008 07:47 PM

This the one I bought. http://cgi.ebay.com/ebaymotors/_Car-...em230274612076
Comes with 4 arms.

**mreuro4** · 26-07-2008 10:24 AM

Hey all,

I just fitted this morning a Wicked Tuning camber kit from US Ebay. Cost $130 delivered AUD. Details are in link. I have to say very easy adjustment and excellent quality. Cheers.

http://cgi.ebay.com/ebaymotors/WICKE...spagenameZWDVW

**achia** · 26-07-2008 04:47 PM

Originally Posted by kingfoo

^^^ That's who I got mine from, Import Auto Performance. I purchased it through their website though, http://www.iapdirect.com, as opposed to Ebay. With shipping and currency converted to New Zealand dollars it was alot cheaper then getting it from an Aussie supplier.

Cool... have you install it??