Hey all,
I just installed K-Sport on my CL9, and are having some problems with the rear rattling. Tyre shop said they are not seating properly. Excellent coilovers though. Bought them from 999 auto, and Adam is going to have a look at the setup this week. Hopefully can get rid of the rattles. Free plug for K-Sport though! ;-)
Cheers.
chances are your springs are not captive when they're at full travel.
To make them captive you need to wind the collars up to the bottom of the spring to hold them in place. If you want you can preload the spring slightly by screwing the collars up a little mrore to compress the spring slightly before theres any weight on it. Try to do the same adjustments to both sides to get an even effect across the width of the vehicle.
Only other things that could be rattling are if the bolts are loose or if the metal brackets that are on the brake lines are hitting the body of the coilovers.
stick your own head under there and have a look. some mech miss the most obvious things at times.
Hey All,
Need your help. The workshop has preloaded the springs 10mm both F & R, however there is still a rattle. There is nothing else noticeable causing this. The workshop have stated that after installation if the coil overs were not preloaded then the shock may have bent. Is there anyway possible this could happen? Cheers.
Luke
Bookmarks