[cl9] extractors question

[ig3o]

hi im currently looking for extractors to buy.. and i've been looking around and most of the good brands are made for the k20a.. well my question is.. does the cl7 euroR k20 headers fit the cl9 k24?.. and if i does fit, do i need any special mods 2 make it happen?

these are some off the headers i've come accross
- 5zigen PRORACER RACE HEADERS for the CL7
- Spoon 4 to 2 Exhaust Manifold CL7
- Feels Exhaust Manifold CL7
- Mugen 4-2-1 Exhaust Manifold K20a

[Crapdaz]

i think the CL7 extractors run shorter than the CL9.

Go for Toda manifold, and source from TODA AU.
Otherwise maybe 5zigen i'd like to see how nice they are and performance, might get them in place of my DC sports.

[ig3o]

ooOooo yea 5zigen would be good =)

[Crapdaz]

ooOooo yea 5zigen would be good =)

lol it'll match my exhaust.
and my lug nuts.

[LXRY]

Anyone have any idea on how much these products are or if the thread starter would like to share prices with us would be nice as i too am going to change mine aswell...

[Crapdaz]

5zigen racing manifold is about $1300-1400 shipped to door.

[ig3o]

the Spoon extractors 4-2 CL7 AU $ 878.26
@ www.nengun.com
not including shipping cost, tax, etc...
and also u hav 2 buy the other piece where its 2-1

not sure if its reliable but thats where i found it

the Feels extractor is 147000yen which comes down to about $1.5k AUD
and again thats not including shipping, tax, etc...

[Crapdaz]

the Spoon extractors 4-2 CL7 AU $ 878.26
@ www.nengun.com
not including shipping cost, tax, etc...
and also u hav 2 buy the other piece where its 2-1

not sure if its reliable but thats where i found it

the Feels extractor is 147000yen which comes down to about $1.5k AUD
and again thats not including shipping, tax, etc...

on my nengun account, delivered to my door is about $1350.

yes, nengun is where i buy stuff from but takes forever to receive, BUT try perfectrun they are good and fast too.

try perfectrun.com.au and see how much they charge
ontop of that you have to add additional import costs cause it exceeds $1k unless you tell them to invoice only for the price of the product.

I WANT TO GET IT NOW!!!

[aaronng]

the Spoon extractors 4-2 CL7 AU $ 878.26
@ www.nengun.com
not including shipping cost, tax, etc...
and also u hav 2 buy the other piece where its 2-1

not sure if its reliable but thats where i found it

the Feels extractor is 147000yen which comes down to about $1.5k AUD
and again thats not including shipping, tax, etc...

You need to have the 2-1 section from the CL7, which we don't have in our car.

Also, headers for CL7 tend to require JDM cat (or an aftermarket cat with the same total length of cat + piping)

[Crapdaz]

You need to have the 2-1 section from the CL7, which we don't have in our car.

Also, headers for CL7 tend to require JDM cat (or an aftermarket cat with the same total length of cat + piping)

the 5zigen race header comes in the 4-2-1 but i am unsure about the flange that connects to the CAT.

[EuroAccord13]

Go Toda Racing Headers, Adrian (Toda AU) can hook you up... A few of us have them and we love them!

[aaronng]

the 5zigen race header comes in the 4-2-1 but i am unsure about the flange that connects to the CAT.

I meant the spoon 4-2 header.

For the 5zigen racing header, there is no flange. You are meant to weld your own one on. i think there is also no port for the O2 sensor, so you will have to make a pre-cat O2 port on your cat section.