I've only heard that the only diff between the JDM DC5 and EP3 are tune and header design in the 5ps difference. My guess would be that there are very minor differences and the difference would not be noticeable.
What I do know is that when I changed mine, the EP3 ones were better in size and design that the X-Force one that was fitted to my brothers DC5R.
thanks man.
I want to know if there is an actual size, length or material grade difference
I'd say it'd be made from the same stuff, which to me seems like its actually stainless or some decent grade steel, its not cast! Design is 4-2-1 and to use the EP or Toda etc you'll need EP3 Sway bar for clearance.
Can be easily modded to fit by local exhaust shop!
I'd say it'd be made from the same stuff, which to me seems like its actually stainless or some decent grade steel, its not cast! Design is 4-2-1 and to use the EP or Toda etc you'll need EP3 Sway bar for clearance.
Can be easily modded to fit by local exhaust shop!
Did you notice a big jump in power when you got your toda ones installed
Im after the Integra (DC5) Type S "Workshop" Service Manuel. help a brother out
Did you notice a big jump in power when you got your toda ones installed
To be honest.....not really. But having said that the TODAs are suppose to give a little more response and midrange. Unfortunately I did not do a dyno compare, but I have seen others (DC5R) put on about 3-4 kw from headers!
Having said all that, these JDM headers are as good as some aftermarket ones! So the gains from the TODA would not have been as much as say a DC5R/S would have.....if that makes sense!
To be honest.....not really. But having said that the TODAs are suppose to give a little more response and midrange. Unfortunately I did not do a dyno compare, but I have seen others (DC5R) put on about 3-4 kw from headers!
Having said all that, these JDM headers are as good as some aftermarket ones! So the gains from the TODA would not have been as much as say a DC5R/S would have.....if that makes sense!
Originally Posted by EL_DC5
no can you make more sense of it!! LOL
JDM K20 headers is better than AUDM K20 header!
Toda header is good!
Therefore when the JDM header is replaced by Toda (or any other header for that matter), the gain is less when compared to a AUDM header as they're not as good to start with!
Bookmarks