Results 1 to 5 of 5
  1. #1

    removing back seats from EK civic

    I had a quick look, and i remember my 95 VTi had similar seats at the back. But I also remember sweating trying to get the seats out :P

    Is there an easy way to get those clips off that hold the rear seats down? Is there a maneuver you do or something?

  2. #2
    Member Array
    Join Date
    Mar 2007
    Location
    www.letusdrive.com.au
    Car:
    D15B7 YOOOOOO!
    wrong section mate

  3. #3
    It's to run the stereo cables

  4. #4
    Member Array
    Join Date
    Aug 2005
    Location
    Melbourne
    Car:
    GE8
    Is it the bolt that hold the rear seat down. I have a coupe, and there is only 1 10mm bolt to undone. Reach it from boot.

  5. #5
    Member Array
    Join Date
    Jun 2004
    Location
    syd
    Car:
    ek
    fold your seats down
    push the two seats towards the centre . remove the plastic clips on either side of the seats at the pivot section

    push the two seats back to the outside
    and the seats should fall out of place very easily. its literally a 60second job

    as for the bottom bit, undo the 10mm bolt. and lift seat
    12.949 @ 107.71mph
    2.063 60ft on Advan AD08
    EKK20A 142.9kw on 98ron

    its not called stance if you're on spacers..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.