Hondata Reflash in Australia?

[TheSaint]

i have been searching around for engine management solutions for the 04 CL9
totally love the S300 on my EG and for around $600 it was a bargain imo

as far as i can tell the best Hondata solution for our cars is either the twin ECU and K-Pro or the TSX ECU and Flashpro - both of which are up around the $1500-$2000 mark

on the US forums alot of guys get the Hondata Reflash done on their standard ECU and they list it as around the $400 (usd) mark

can this be done in australia? are there any companies that can do it?

http://www.hondata.com/reflash_tsx.html

[mocchi]

hondata can do it

[RenzokukenJ]

Are you going to d swap your cl9?

[Fredoops]

Revzone does Hondata reflash for Prefacelift CL9

it costs $1300 dollars

you'd better off getting flashpro.


Im trying to crack the CL9 ecu at the moment, but post facelift would come first because i know it's got rewritable eprom.

[kristrifo]

toys garage

ive asked around and ive only gotten positive feedback

im gona go to them once i buy my flashpro

[kristrifo]

Revzone does Hondata reflash for Prefacelift CL9

it costs $1300 dollars

you'd better off getting flashpro.


Im trying to crack the CL9 ecu at the moment, but post facelift would come first because i know it's got rewritable eprom.

i will be following this.

[TheSaint]

$1300 just for a reflash is way too much - could probably get a TSX ecu and Flashpro for that kind of money

[axispower]

i will be following this.

I am too.

[egcarbz]

silly question but worth it if mines a auto? just want more power lol

[t3kNo*]

from what i've been reading egcarbz it works for both auto and manual.

huge improvement in mid range is and slight improvement on high range.

[TheSaint]

i would mostly want the reflash for the lower vtec and stronger top end - but its not tunable and doesnt have output to computer
it also seems rather expensive in australia for what you get out of it - is there any cheaper alternatives?

the flashpro enables re-tunability so you could get it tuned specifically to the cars mods etc
and it has output to a computer so you can do basic diagnostics and have a temp HUD etc
so for the money i would rather save a bit and get a TSX ECU and a Flashpro ...

[TheSaint]

Revzone does Hondata reflash for Prefacelift CL9

it costs $1300 dollars

you'd better off getting flashpro.


Im trying to crack the CL9 ecu at the moment, but post facelift would come first because i know it's got rewritable eprom.

let me know any updates that you might have Fredoops =)
your info and advice on the CL9 has been great so far - thanks!!