Results 1 to 9 of 9

Thread: brake upgrade

  1. #1
    Member Array
    Join Date
    Oct 2004
    Location
    Perth WA
    Car:
    EK1 CXi

    brake upgrade

    i hate drums
    anyone else hate drums?
    i'm going to replace my drum brakes... so i may as well do them all
    what other model disc brakes fit a 98 honda civic cxi???
    or can anyone recommend an aftermarket replacement?

  2. #2
    Member Array
    Join Date
    May 2004
    Location
    S.E. Melbourne
    Car:
    del sol
    For a rear disc conversion im pretty sure ull need ..

    - Compatable rotors and discs (from EK4, i think EG4/5 will fit EK too?)
    - New Lower Control Arms
    - New master cylinder
    - New rear handbrake cable

    Im not sure if they make aftermarket rear drum > disc conversion kits or anything...
    Quote Originally Posted by z3lda
    ey, was drivin a honda city before...
    felt like the biggest poofter in the world..LOL

  3. #3
    Member Array
    Join Date
    Mar 2004
    Location
    Melbourne
    Car:
    DC5S but not for long...
    u could get integra type R brakes, but the problem with that is u geta 5 stud conversion in the process and have to get new rims...

    dont bother getting Ek4 brakes, they suck

  4. #4
    Member Array
    Join Date
    May 2004
    Location
    S.E. Melbourne
    Car:
    del sol
    For rears i doubt it matters much at all.
    Upgrade your fronts to some good ones, say from an EK SIR if u can find...

    Front breaks make up over 75% of breaking (from what ive been told from brake speciliasts) so rears just assist in the breaking, the fronts do most of the job

    I also heard that drumies arnt that bad, they just fade quicker than discs... ?
    Quote Originally Posted by z3lda
    ey, was drivin a honda city before...
    felt like the biggest poofter in the world..LOL

  5. #5
    Member Array
    Join Date
    Mar 2004
    Location
    Melbourne
    Car:
    DC5S but not for long...
    hahaha do the DIY braided lines trick, its actually pretty cool

  6. #6
    Member Array
    Join Date
    Oct 2004
    Location
    Perth WA
    Car:
    EK1 CXi
    diy braided lines???
    tell me more
    sounds like a plan

  7. #7
    A.K.A VTI60Y Array
    Join Date
    Jan 2004
    Location
    8100rpm
    Car:
    RUSTED Sleeper
    get integra vtir brakes for the front and rear. the parts should cost around 1000
    KK24AA

  8. #8
    Member Array
    Join Date
    Oct 2004
    Location
    Perth WA
    Car:
    EK1 CXi
    those integra vtir brakes are 5 stud aint they?

  9. #9
    Member Array
    Join Date
    Oct 2003
    Location
    Sydney, Aust.
    Car:
    EP3-R
    Quote Originally Posted by Surrufus
    those integra vtir brakes are 5 stud aint they?
    no, they're 4 studs - integra type r has 5 studs
    BBC/IC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.