HID's for the Euro

[Ragerunner]

Hi guys,

I am looking into buying HID's for my euro. The thing is, there are so many out there at varying prices i'm not too sure what I should be looking for.

I have chosen to go for the 6000K one, which is pure white right?

But I can't really decide what brand to get and which is the best for price/quality.

Also, are HID's easy to self install? Or should I be taking it to somewhere professional? I have no experience in what switching to HID's involve, so I want to know if it's an easy follow the instructions type of procedure?

Thanks!

[aaronng]

http://www.ozhonda.com/forum/showthread.php?t=72077
http://www.ozhonda.com/forum/showthread.php?t=52553

[EUR003act]

pure white is 5000k

brightest possible white is 4300-4700k (used in all standard HID cars)

6000k is sexyiest colour without loosing too much output

8000k looks hot but you sacrifice approx 50% light output

[EuroAccord13]

The new HID kits are plug and play units so it's an ease, you only have to figure out where you want to mount the ballast....

[J-TODA]

^^ yer thats right...takes 2hrs?? maybe less... jst the hasssle of removing front bar and putting on front bar

[Ragerunner]

Thanks for the replies.

Hmmmm....after reading a few threads I'm starting to re-consider getting HID's and perhaps just change the stock halogen globe to the Raybrig one's that JDMCONCEPT sells for $98.

What do you guys think? Are they any good?

Also, for the parking/interior lights in the euro, what details should I be looking for so if i buy new ones they fit perfectly?

[aaronng]

Also, for the parking/interior lights in the euro, what details should I be looking for so if i buy new ones they fit perfectly?

http://www.ozhonda.com/forum/showpos...7&postcount=21

The parkers are also T10 wedge bulbs.

[applio]

i able to help you out!!!

[akina]

^^ yer thats right...takes 2hrs?? maybe less... jst the hasssle of removing front bar and putting on front bar

u dont need to remove the front bar...

[J-TODA]

u dont need to remove the front bar...

realli ??i would assume it would be easier if u did....instead of trying squeeze ur hand through the gaps inorder to securely install the bulbs

[akina]

well... i dont know how taking off the bumper bar is going to help... unless u take off the whole head light unit as well, THEN u have plenty of space to work with

Even if u want to change the parkers u dont need to take off bumper. Turn ur wheel to one side and take off 2 clips up the top and squeeze ur hand inside to change it

[J-TODA]

yer ahha dats wat i meant... removing the headlight

yer dats true...for parkers u dont need to remove front bar