I had my Euro dynoed today

[yfin]

that's low for a manual i guess, since i got an auto and achieved 112kw with my current mods on the dyno dynamics.

Different dyno, different day. Enough said.

[sodaz]

Hey, i also went there with ALN and one other euro in the afternoon session. i got 111.5 kw. its too low actually for my current engine mods. my current engine mods are Comptech header, Skunk2 Racing catback, Injen CAI, & Unortodox Racing Pulley sets.

Do you guys experience rattling/vibration noises with the Comptech header? The acurazine forum people complain about it a lot.

[sodaz]

I got comptech airbox,comptech header, FGK cat back, metal cat, 64mm TB, UR pulley, HKS spark plug,and comptech flywheel and exedy clutch( well actually, I don't think helping on making power)

Nice mods ALN. Where did you get the 64mm TB from? Did you have to bore the stock one with a machine?

[Drew]

How much torque did you get?

My wagon only got 86kW which is a bit sus. cause it got 107kW in NZ o.O
But at least I got decent torque

[ALN]

Nice mods ALN. Where did you get the 64mm TB from? Did you have to bore the stock one with a machine?

I bored the stock one to straight through 64 mm and changed the butterfly to fit.

that's low for a manual i guess, since i got an auto and achieved 112kw with my current mods on the dyno dynamics.

His car is auto as well. In what gear your car was dynod? his car was dynod on the 4th gear.

[ALN]

Different dyno, different day. Enough said.

very true, even in the same dyno different day can result different figure.

[BusterSonic12]

His car is auto as well. In what gear your car was dynod? his car was dynod on the 4th gear.

4th gear. as well. i only hav intake + exhaust + apexi neo at the time.
is that your car on your dp? CF bonnet?? does the bigger TB give u much gain that u can feel?

[ALN]

Do you guys experience rattling/vibration noises with the Comptech header? The acurazine forum people complain about it a lot.

If I didn't read the acura-tsx forum, I would not even know if there vibration that others experienced. I have been using the header alsmot 1.5 year, I haven't really noticed if there is any vibration.

[aaronng]

that's low for a manual i guess, since i got an auto and achieved 112kw with my current mods on the dyno dynamics.

They ran theirs on a Dynamics Test System dyno, which supposedly reads lower than a Dyno Dynamics dyno.

[CL9-K24A3]

that's low for a manual i guess, since i got an auto and achieved 112kw with my current mods on the dyno dynamics.

I forgot to tell you guys that my car is auto but 111.5 kw its still too low for my current mods even my car is auto

[CL9-K24A3]

Do you guys experience rattling/vibration noises with the Comptech header? The acurazine forum people complain about it a lot.

Nope,i never have an experienced like that

[sodaz]

Nope,i never have an experienced like that

That's great. I wonder why it occurs with TSXs but not Euros considering that they are pretty much the same car.