whiteline swaybar for ek/em

**vteccoupe** · 28-05-2008 10:29 AM

Any1 has pictures of the updated version of the whiteline swaybar kit for EK/EM?

i called up the dealer here in WA and they said it doesnt come with any subframe reinforcement?

**DNYALL** · 28-05-2008 06:36 PM

I had mine sent to me from whiteline, after my original one cracked my sub-frame. This is the new re-inforcement with the old swaybar installed on my car. Also in the kit was a new set of endlinks, which were a little bit longer so I put them in as well.

**vteccoupe** · 28-05-2008 06:58 PM

hi there, looking good. What size swaybar are u using? the 20mm or 22mm?
may i know hw much u paid for this whole kit? cheers

**DNYALL** · 28-05-2008 07:07 PM

I got the 22mm swaybar, it is set to the hardest setting. I got the new re-inforcement kit posted to me for free from whiteline after my sub-frame broke from their old set up. I called them up and complained and they posted it to me for free as compensation as well as 50% of the repair bill

**vteccoupe** · 28-05-2008 07:19 PM

ic so all up how much it costed? swaybar+reinforcement kit not including the repairs?

Originally Posted by DNYALL

I got the 22mm swaybar, it is set to the hardest setting. I got the new re-inforcement kit posted to me for free from whiteline after my sub-frame broke from their old set up. I called them up and complained and they posted it to me for free as compensation as well as 50% of the repair bill

**55EXX** · 28-05-2008 09:04 PM

from whiteline site

Swaybar-X h/duty Blade adjustable
1 / includes h/duty brace and 22mm bar
Code: #BHR83XZ
Price: AU$272.73 (Australian Dollars)
NOTE: Australian deliveries must add 10% GST

**bennjamin** · 28-05-2008 09:10 PM

Originally Posted by vteccoupe

i called up the dealer here in WA and they said it doesnt come with any subframe reinforcement?

funny you say that.

Because , even now with Whitelines new design ( for the EK/EM variety only mind you ) they are lacking ONE very important part - the REAR "brace" that links the mounting and properly spreads the load. I would expect the exact same "issues" with these new kits compared to old. Maybe sooner ,maybe later. But still will happen.

Learn from BEAKS and ASR guys ffs.

**Zdster** · 28-05-2008 11:53 PM

Originally Posted by bennjamin

funny you say that.

Because , even now with Whitelines new design ( for the EK/EM variety only mind you ) they are lacking ONE very important part - the REAR "brace" that links the mounting and properly spreads the load. I would expect the exact same "issues" with these new kits compared to old. Maybe sooner ,maybe later. But still will happen.

Learn from BEAKS and ASR guys ffs.

Agreed

.

It also appears that the reinforcement kit pictured above does not seem to be anywhere as thick as the ASR kit.