VTI-R seat Question

[tRipitaka]

is there an easy solution to this?

ie take out the box?

but then i'd imagine u couldn't do that without taking out the whole thing and replacing it with a itr bit instead?

but when u say hard do u mean there's a bit of friction? or u can't get into certain positions? cuz that would b annoying.

switch the passenger seat with the driver seat..
then your knobs will be on the outside rather than the inside.

[94dc2tegz]

oh, didn't realise the adjuster knob was on the inside

i thought u guys meant that the seat would rub on the centre box.

alright cool. as long as no one else has any probs.

thanx

[G-Stick]

u could.. be then it might be hard to get it to with the doors closed? no idea, just put it in

[kj887]

beta get recaro rails, rather modify std vti-r rails (can actually weld on recaro).

[94dc2tegz]

beta get recaro rails, rather modify std vti-r rails (can actually weld on recaro).

yea thats given

i was just worried after seeing pix of the ITR interior and noticing that ITR's don't have the centre box for all ya crap that u'd rarely use. so i wouldn't miss it if i could remove it

doesn't look like i can though. o wells.

[L a z y b O Y]

it does rubbed btw, the box creates a bit of friction when the seat is reclined forward and backwards i have marks to prove, but that doesnt bother me

[TBS33N]

definately switch the rails around and then all you need to get is a slightly longer bolt for the rear left of the driver side and im pretty sure the rear right of the passenger seat as well. Other than that it should only take about 15 to 20 min for both seats swapped