Spoon Caliper,, Rota slipstreem wheel

[b20b]

Does anyone know if the Rota slipsteem wheel in 15" or 16" fits on a dc2 vtir (4 x 100) with spoon calipers WITHOUT A SPACER. Considering purchace want to get the right wheel. From my reserch these wheels have a 40 offset

[zco]

no they do not

[Sexc86]

hmmm 15s deffinately not... 16s could be a maybe?

paul had 16" rotas with bigbrake willwoods... much bigger the spoons

[b20b]

is there any one else that has experience with 16 rotas wheels,,, will they fit or not. Would realy like someone who has them or has tried to fit them

[PNS 001_EG3]

if your in brissi i have sum 16 inch rotas sitting around waiting to go on my ride. if you have the brakes on and wanna do a trial fit you can pm me. (paul did have rotas with willwoods which are bigger but they were spaced with a 5mm spacer.)

[b20b]

im in Melbourne ,,thanks for that

[fatboyz39]

Those spoon calipers won't fit DC2 hubs without some slight modification.

If you had 5stud then straight bolt on. For 15' wheels you need at least 15x7 +35 offset to clear spoon calipers without spacers. You can use 15x6.5' +38 or +40 with a 8mmspacer and it'll clear it. It also comes down to rim design.

[Q_ball]

You'll need a minimum 3mm spacer.
Also depends on the type of wheel and the way it was designed.

My rims atm are 15x6.5 +35 and they clear the calipers.

[b20b]

You'll need a minimum 3mm spacer.
Also depends on the type of wheel and the way it was designed.

My rims atm are 15x6.5 +35 and they clear the calipers.

Are your wheels 4 or 5 stud if they are 4 stud what brand are they

[Q_ball]

Theyre 4x100 - type, not sure...

[dumped echo]

doesn't the spoon fit run 15" rims with spoon calipers...?
dunno if the calipers are the same size though...

[b20b]

http://www.tempetyres.com.au/product...t=&part_no=140
star corp racing lite 5 .....15x 6.5 40 off set any one tried these to fit with spoon calipers.... looks like good clearance