who knows what to do with these ?????

**FR33K** · 13-12-2004 08:14 PM

hey
just about completed my b16a conversion into my LS but i have 2 plugs left over and i dont know what to do with them hmmmm......
heres pics

any ideas ?!?!

**g3vtir** · 14-12-2004 05:13 AM

hehe i have no idea.....but let me know when its done...i wanna see how it goes.

**tinkerbell** · 14-12-2004 08:40 AM

what were the plugs previously attached to?

what colours are the wires coming out of them?

have you treid to start the engine?

**tinkerbell** · 14-12-2004 08:55 AM

the top pic plug should attach to the engine harness...

**tinkerbell** · 14-12-2004 08:58 AM

and the bottom pic should attach to the FPR solenoid?

**FR33K** · 14-12-2004 09:11 AM

but theres no more places to plug them in lol
everything is taken..

nah i havent tried to start it yet.. in the next hour or so.. ill c what happens then

**tinkerbell** · 14-12-2004 09:12 AM

and what happens when you turn the ignition on?

**FR33K** · 14-12-2004 09:15 AM

ill go turn the ignition on now and see what happens

**traNce_gl** · 14-12-2004 09:16 AM

Originally Posted by FR33K

ill go turn the ignition on now and see what happens

Did it go vRoom Vroom or clik clik clik

**tinkerbell** · 14-12-2004 09:17 AM

is the top pic plug attached to the engine harness or the chassis harness?

there should have been 3 plugs around that area, the two pin one, and the two other larger plugs.

**FR33K** · 14-12-2004 09:20 AM

the top pic is attached to the engine harness

**tinkerbell** · 14-12-2004 09:20 AM

Originally Posted by traNce_gl

Did it go vRoom Vroom or clik clik clik

it would not go vroom vroom if he was only going to turn the ignition on.

that only happens when you try to start it.

when you turn the ignition on it should go click...click and you should hear the fuel pump go whizzzzzz for 2 seconds.

the check engine light should come on for 2 seconds then go off.

if it does not go off - that is when you check for codes on the ECU and then you can troubleshoot...