facelift fog lights

[kraftycuts]

i have seen lots of these on ebay and have been searching around. but has anyones actually purchased these from ebay? im sure its from the us. how did they find installation? ie difficult?
if not from ebay is there anywhere else in aus to get them?

[hisoka]

there all the same just different bulbs and some yellow some clear.

easy to wire aswell. 80 bucks cant go wrong

[Dy_]

there all the same just different bulbs and some yellow some clear.

easy to wire aswell. 80 bucks cant go wrong

easy to wire if you're got basic knowledge of electronics.

theres only ONE seller on usebay that i've seen that has glass lenses whereas the rest are all plastic.

however i had a problem with him...i paid for the lights and never received the lights. After emailing them a few times they still didnt reply but as soon as i opened up a paypal dispute i got a reply and refunded my money.

[latinstyle69]

hey mine are from the us and the same as the ebay ones except mine are glass lenses, you dont want plastic as they are easy to crack.

These aren't hard to wire up at all, if u do decide to get em and need a little help just let me know.

[latinstyle69]

Or just refer to this thread where i posted some helpful info.

http://www.ozhonda.com/forum/showthr...t=80567&page=6

[misteR_bilzz]

http://www.ek9.org/forum/attachments...cfoglights.pdf

[latinstyle69]

^^^ The Above is for OEM foglights.

it can be used for how to install the foglight but not the harness installation due to the ebay ones come with a different harness.

[misteR_bilzz]

pretty much the same concept. the plugs are different, i used it more for the bumper cutout didnt wanna ruin shit.

[latinstyle69]

haha yea i did the same thing hey, but the ebay wiring harness can be abit confusing if you dont really no to much about electrics

[Mugen Civic]

i have seen lots of these on ebay and have been searching around. but has anyones actually purchased these from ebay? im sure its from the us. how did they find installation? ie difficult?
if not from ebay is there anywhere else in aus to get them?

Yea there pretty good, only bad thing about them is that after awhile, u might have to purchase a new or replace the switch as the light in the button melts the plastic and buckles it.

As for wiring, its alil different to OEM one but just follow what these other ppl have posted up and u'll be fine.

As for the outside fitment and light, no problems. Its easy as and everything fits.

My example:


Goodluck

[jeansey]

ill be installing mine next week.

had them for months but never got around to it. getting the holes cut out for me at a smash repairs tho.

[hisoka]

diy it man~so easy