Results 1 to 8 of 8
  1. #1
    Newcomer Array
    Join Date
    Oct 2008
    Car:
    '95 vti-r Integra

    Unhappy dc2 seat problems... or is it normal?

    Hey guys, I've only had my 95 dc2 integra for a few months now, and i dunno if its juz me, BUT, my seats are way annoying at sliding forward etc. passenger side has that little black pedal u push, and use to tilt the seat forward... should it also simultaneously slide the seat forward (along the rails)too like in heaps of other cars i've sat in? if this is abnormal, ideas on fixing would be sweet.

    cheers

    (ps, didn't know whether to post this in noob forum or here, plz forgive otherwise.)

  2. #2
    Member Array
    Join Date
    Aug 2005
    Location
    Melbourne - Westside M*th
    Car:
    96 Integra
    nah its normal for your car not to slide forward while tiliting. only the facelift model dc2 seats slide while tilting forward

  3. #3
    Newcomer Array
    Join Date
    Oct 2008
    Car:
    '95 vti-r Integra
    Would dc4 seats fit in the dc2, thus getting the whole multimovement thing goin?

    and if so, would i ahve to replace the rails etc due to a diff design etc?

  4. #4
    Member Array
    Join Date
    Aug 2005
    Location
    Melbourne - Westside M*th
    Car:
    96 Integra
    if u want it you should get the seats off the facelift dc2, yes all integra DC seats are interchangeable

  5. #5
    s tune Array
    Join Date
    Jun 2005
    Location
    ADL
    Car:
    99 DC2 sold :(
    If it helps I have a 99 DC2, from memory using the foot pedal or side handle both tilt the seat fully forward and then slide.

  6. #6
    Member Array
    Join Date
    Sep 2007
    Location
    Melbourne
    Car:
    bb6 Type S
    Quote Originally Posted by G-Stick View Post
    nah its normal for your car not to slide forward while tilting. only the facelift model dc2 seats slide while tilting forward
    my pre-facelift 96 dc2 slides forward?
    Shoudln't any coupe's seats slide forward so that passengers can get in and out? Wouldn't make much sense if they didn't...

  7. #7
    Member Array
    Join Date
    Aug 2005
    Location
    Melbourne
    Car:
    GE8
    Quote Originally Posted by rbk_212 View Post
    my pre-facelift 96 dc2 slides forward?
    Shoudln't any coupe's seats slide forward so that passengers can get in and out? Wouldn't make much sense if they didn't...
    All seats are slide forward. What g-stick means is the one touch tilt and slide. You only need to push a little lever on the passenger seat to tilt and slide.
    But in recaros, you need to push down the side lever to tilt, and the push up the bottom slider to slide the seat, so that back passenger can come out.

  8. #8
    Member Array
    Join Date
    Sep 2007
    Location
    Melbourne
    Car:
    bb6 Type S
    Quote Originally Posted by twing View Post
    All seats are slide forward. What g-stick means is the one touch tilt and slide. You only need to push a little lever on the passenger seat to tilt and slide.
    But in recaros, you need to push down the side lever to tilt, and the push up the bottom slider to slide the seat, so that back passenger can come out.
    oh pardon me i must have mis-read.

    anyway my dc2 has the one touch tilt and slide lever, just FYI

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.