Ek Immobilser Help!

**g00gz** · 04-11-2008 03:21 PM

Hey guys,

I've got a 99 EK and was wondering what the factory remote immoliser remote is paired to? I know on the same era commodores etc they are paired to a Body Control Module, Do Honda's use the same kind of setup? If so where is it located?

**dupac->** · 04-11-2008 03:23 PM

under the steering column thats the actual immobiliser unit itself.

could be same thing for ur remote/keyless entry

umm i dont thing that factory key thing is a immobiliser its just used to unlock ur doors. i dont think it arms anything? ie the immobiliser.

**g00gz** · 04-11-2008 03:30 PM

Originally Posted by dupac->

under the steering column thats the actual immobiliser unit itself.

could be same thing for ur remote/keyless entry

umm i dont thing that factory key thing is a immobiliser its just used to unlock ur doors. i dont think it arms anything? ie the immobiliser.

Ah ok, so its just basically like a remote central locking? So theoretically the car should start without even having a remote?

**dupac->** · 04-11-2008 03:36 PM

Originally Posted by g00gz

Ah ok, so its just basically like a remote central locking? So theoretically the car should start without even having a remote?

yep and yep.

the immobilser has to do with the chip inside the key so dont lose all of your keys. make sure u have spares

**g00gz** · 04-11-2008 04:18 PM

Originally Posted by dupac->

yep and yep.

the immobilser has to do with the chip inside the key so dont lose all of your keys. make sure u have spares

funny you should say that because thats the exact problem I have: Bought a repossessed car with no keys, have now changed the ignition barrel, locking module / remote and it's still not starting on me.... grrr!

You mentioned the chip inside the key - what is that paired to?

**dupac->** · 04-11-2008 04:30 PM

the key is paired to the immobiliser under the steering coloumn.

if the immobiliser unit needs to be replaced it would cost u more.

if u located in syd call perfect lock smiths 0419 436 389.

if it needs to be replaced your probbably looking around the $400 mark with keys programmed and cut.

if he can just copy the code from ur original immobiliser then u will just have to pay for the keys.. which are about $70 each from him.

umm well call him and he will come out to you and you will found out whats needed

i wouldnt reccommened to go to a honda dealer.. unless you wanna get dung punched with the price they would charge

**redefine** · 05-11-2008 12:04 AM

yeah, had to get the same thing for me, we needed a new key, and didnt have the origonal red one, so before i bought the car, the guy i brought it off got a new immobilizer/key setup, cost him $400 for it, plus another $120 from me to get it fitted. if you can find a way around it, do it.

**ECU-MAN** · 05-11-2008 07:47 AM

Originally Posted by g00gz

funny you should say that because thats the exact problem I have: Bought a repossessed car with no keys, have now changed the ignition barrel, locking module / remote and it's still not starting on me.... grrr!

You mentioned the chip inside the key - what is that paired to?

I can pair your keys up to the immobilser and ECU with out the red key. PM me for more details

**dupac->** · 05-11-2008 10:48 AM

well there's a way on the forums somewhere shows that u can take out the immobiliser from the ECU somehow..

let me search for it

**dupac->** · 05-11-2008 10:53 AM

http://www.ozhonda.com/forum/showthr...ht=immobiliser

there yah go.. if you're iffy about following the instructions yourself.. im sure you can PM ECU-MAN and he can sort something out for you... obviously because its a different ecu you have from ECU-MAN's DIY...