Page 7 of 12 FirstFirst ... 45678910 ... LastLast
Results 73 to 84 of 133
  1. #73
    Member Array
    Join Date
    May 2005
    Location
    ACT
    Car:
    05 Euro M Red 6
    Damn my clutch and my cars 49 000kms. To too much meat left for me to upgrade to a lightweight package!
    I went to the modded XR5 Turbo with Mods - the dark side.....BOOOOST!

  2. #74
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    it's a good drive with lightweight f/w and clutch.

    from aaron's car. Revs so freely.
    vTeK 4-Life!
    FOR SALE: CL9

  3. #75
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by Crapdaz View Post
    it's a good drive with lightweight f/w and clutch.

    from aaron's car. Revs so freely.
    I noticed you didn't use full throttle in 1st and 2nd gear to redline though. hehehe. Good anyway, since my engine oil was still cool.
    --------------------------------------
    Stocky CL9 - 1:17.2

  4. #76
    Member Array
    Join Date
    Jan 2008
    Location
    House
    Car:
    RA109 / BGP001
    does anyone know the reason as to why, when im going low speeds my 2nd gear is a stubborn to shift into ? and also, when im going red line 1st then shift to 2nd it crunches a bit ? makes a loud shift noise.

    and one more thing. when i go 1st into second and drop the clutch in 2nd it jolts the car. is this normal ?

    yes i am pushing the clutch all the way in then shifting. i have no trouble with the other gears just 2nd.

  5. #77
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Quote Originally Posted by hooyn View Post
    does anyone know the reason as to why, when im going low speeds my 2nd gear is a stubborn to shift into ? and also, when im going red line 1st then shift to 2nd it crunches a bit ? makes a loud shift noise.

    and one more thing. when i go 1st into second and drop the clutch in 2nd it jolts the car. is this normal ?

    yes i am pushing the clutch all the way in then shifting. i have no trouble with the other gears just 2nd.
    If you have problem getting into 2nd gear only, then I reckon the 2nd gear synchros are worn out if the other gears are fine.

    Could be because you are abusing your gearbox? You shouldn't drop the clutch in 2nd if the RPM is not at the exact match. Just release it in one smooth motion.

    Is your clutch bite point at the bottom or in the middle?
    --------------------------------------
    Stocky CL9 - 1:17.2

  6. #78
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by aaronng View Post
    I noticed you didn't use full throttle in 1st and 2nd gear to redline though. hehehe. Good anyway, since my engine oil was still cool.
    yeh didn't want to incase your car was cold.
    plus it is not my car so didn't want to push it all the way. Get nervous.

    Quote Originally Posted by hooyn View Post
    does anyone know the reason as to why, when im going low speeds my 2nd gear is a stubborn to shift into ? and also, when im going red line 1st then shift to 2nd it crunches a bit ? makes a loud shift noise.

    and one more thing. when i go 1st into second and drop the clutch in 2nd it jolts the car. is this normal ?

    yes i am pushing the clutch all the way in then shifting. i have no trouble with the other gears just 2nd.
    Its the euro gearbox, it's like that. i tried before and couldnt shift into 2nd.

    Have you drive for a bit until its warm and it shifts nicely.

    But you need to revv match. <-- thats the main factor.

    Or stated by aaron the synchros.
    Last edited by Crapdaz; 12-11-2008 at 09:25 AM.
    vTeK 4-Life!
    FOR SALE: CL9

  7. #79
    Member Array
    Join Date
    Jan 2008
    Location
    House
    Car:
    RA109 / BGP001
    Quote Originally Posted by aaronng View Post
    If you have problem getting into 2nd gear only, then I reckon the 2nd gear synchros are worn out if the other gears are fine.

    Could be because you are abusing your gearbox? You shouldn't drop the clutch in 2nd if the RPM is not at the exact match. Just release it in one smooth motion.

    Is your clutch bite point at the bottom or in the middle?
    its at the middle. now when i think about it. my trips are usually only 10 - 20 minutes usually.

    so what crapdaz said, its not operating at its optimum temperature i believe could be the case ?

  8. #80
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    i found when i dragged my friends auto euro, i couldn't shift into 2nd until i dropped the revs a bit, when i hit 7k.

    Quote Originally Posted by hooyn View Post
    its at the middle. now when i think about it. my trips are usually only 10 - 20 minutes usually.

    so what crapdaz said, its not operating at its optimum temperature i believe could be the case ?
    Quote Originally Posted by hooyn View Post
    its at the middle. now when i think about it. my trips are usually only 10 - 20 minutes usually.

    so what crapdaz said, its not operating at its optimum temperature i believe could be the case ?
    10-20mins doesn't even let the engine oil warm up to it's full potential.
    Does not give the Kseries engine justice.
    vTeK 4-Life!
    FOR SALE: CL9

  9. #81
    Member Array
    Join Date
    Aug 2006
    Location
    Sydney
    Car:
    06 Euro luxury manual
    Quote Originally Posted by hooyn View Post
    does anyone know the reason as to why, when im going low speeds my 2nd gear is a stubborn to shift into ? and also, when im going red line 1st then shift to 2nd it crunches a bit ? makes a loud shift noise.

    and one more thing. when i go 1st into second and drop the clutch in 2nd it jolts the car. is this normal ?

    yes i am pushing the clutch all the way in then shifting. i have no trouble with the other gears just 2nd.
    Change your MTF.Guaranteed improved shifting.

  10. #82
    Member Array
    Join Date
    Jun 2007
    Location
    ACT
    Car:
    Accord Euro Luxury
    Honda 6sp box commonly has trouble with shifting into 2nd... my car does it every now and then...

    Search in the integra forums, theres alot of into there about the problem...

    as said by others, try rev match, and be gentler on that particular change

  11. #83
    Ninja turtle Array
    Join Date
    May 2004
    Location
    Sydney
    Car:
    Chloe
    Mine has no problems. I pull the gearstick straight down into 2nd, not down and to the left like many other ppl.
    --------------------------------------
    Stocky CL9 - 1:17.2

  12. #84
    Member Array
    Join Date
    Aug 2004
    Location
    Sydney Harbour Bridge
    Car:
    03 CL9 Euro
    Quote Originally Posted by aaronng View Post
    mine has no problems. I pull the gearstick straight down into 2nd, not down and to the left like many other ppl.
    roflmao!
    vTeK 4-Life!
    FOR SALE: CL9

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.