Turbo size

[SXYSOL]

hey all just picking peoples brains on turbo size for my car...

its a '95 crx running b16a... just going a bolt on kit with upgraded injectors, fuel pump, malpassi, running cooler and Hondata as well...

anyway planning on running around 5-8psi and was wondering what turbo size would suit...

been offered a T25g of an SR20 silvia and also been offered a T28 of and s14...

other than those i was thinking down the lines of a GT25 or GT28... anyone got any recommendations??

also what about a T3???

thanks

[DLO01]

Hey man, I am not sure about some of the others you have mentioned, but I have a GT28R on my B16A Sol. Its a rated at 320hp. I am currently running 9psi and I am told its good for 15psi or so. starts boosting at 2500rpm and comes on very strong at 3000rpm till redline. Its good for a standard motor and you can up the boost once you strengthen you motor.

[shecomb]

They would all work well on your car. If you can get your hands on ball bearing - go for it! The size sounds like a good match to the engine

[SXYSOL]

ok thanks guys... will start looking around...

[poid]

use the GT28R mate, you wont be disappointed. You can find them for $1200 brand new...bargain

[DLO01]

use the GT28R mate, you wont be disappointed. You can find them for $1200 brand new...bargain

Aye

[pornstar]

pedeh, why lie for, gt28R's are for wimps

[WPN.22R]

have fun!! gt28r is good!! aye yay!!

[SXYSOL]

ok bought a t28 for $100.... runs fine came of my mates car so should be good for now... gunna start saving for GT28R...thanks guys...

[poid]

pedeh, why lie for, gt28R's are for wimps

that's it biatch, i wanna run ya now

[PhatSol]

Hey DLO01, just out of interst what A/R ratio is your GT28R?

[DLO01]

Hey DLO01, just out of interst what A/R ratio is your GT28R?

Compressor wheel is 0.60 I think?