Page 1 of 2 12 LastLast
Results 1 to 12 of 14
  1. #1
    Disabled Array
    Join Date
    Dec 2008
    Car:
    5thgen>jdc2r>dck20>eg>ep3

    just put on an intake

    Hi everyone, i just put a SRI on my ep3 this morning. I noticed that when i gun it and when it hits vtec it tends to pull to a side a lil. I noticed a definate increase in power? Just wondering if this was possible with just an intake or is it just my imagination. Stock intake felt really restrictive towards the higher revs.

    Any information is great

    Cheers

  2. #2

  3. #3
    Member Array
    Join Date
    Feb 2007
    Location
    SydN3Y
    Car:
    your mum
    pull to the side as in your car swerving to the side?? sounds like you need a wheel alignment.

  4. #4
    Member Array
    Join Date
    Jan 2009
    Location
    Melb/Syd
    Car:
    CP2 / EG5
    flat tyre?

  5. #5
    Member Array
    Join Date
    Apr 2008
    Location
    Treasury Casino
    Car:
    fd1
    vtec just kicked in yo and too hard to steer? jokes ^_^ wheel alignment me thinks

  6. #6
    Disabled Array
    Join Date
    Dec 2008
    Car:
    5thgen>jdc2r>dck20>eg>ep3
    nah before when vtec use to kick in it went straight.. before i got it registered last week, the owner put on four new tyres for me including a wheel alignment..

  7. #7
    Member Array
    Join Date
    Jun 2008
    Location
    Sydney
    Car:
    EP3R
    u sure its not just torque steer? yeah i got an SRI in mine aswell and the stock intake is very restrictive...

  8. #8
    sounds like torque steer to me. most honda drivers won't know what that is. haha.

    I didn't get any in my car until i severley lightened it and did I/H/E.

    You're alignment will be fine unless you're pulling to the left all the time. If its only happening on heavy accelleration its torque steer.

  9. #9
    Member Array
    Join Date
    Sep 2007
    Location
    Sydney
    Car:
    EP3R
    yeah do it again and try and hold the steering wheel dead straight. Also what tyres are on the car now ?? i recently got bridgestone adrenalins and find they are a really aggressive tyre n if im not concentrating alot and i hit a bump on the road it starts to pull to a side or even follows truck groves on the road. But thats all good now ive gotton use to it.

    Also with ep3 always drive with 2 hands on steering wheel. When i first got the car i was driving around with one hand and almost got into trouble a couple of times especially when vtec'ing. Car seems to have abit of torque steer.
    Last edited by SuperSteve; 06-02-2009 at 03:44 PM.

  10. #10
    Disabled Array
    Join Date
    Dec 2008
    Car:
    5thgen>jdc2r>dck20>eg>ep3
    Quote Originally Posted by JasonGilholme View Post
    sounds like torque steer to me. most honda drivers won't know what that is. haha.

    I didn't get any in my car until i severley lightened it and did I/H/E.

    You're alignment will be fine unless you're pulling to the left all the time. If its only happening on heavy accelleration its torque steer.
    yups i think it might be torque steer lolz.. maybe i was getting a lil excited by my first mod on my ep3.. =)

  11. #11
    Disabled Array
    Join Date
    Dec 2008
    Car:
    5thgen>jdc2r>dck20>eg>ep3
    Quote Originally Posted by SuperSteve View Post
    yeah do it again and try and hold the steering wheel dead straight. Also what tyres are on the car now ?? i recently got bridgestone adrenalins and find they are a really aggressive tyre n if im not concentrating alot and i hit a bump on the road it starts to pull to a side or even follows truck groves on the road. But thats all good now ive gotton use to it.
    Ive got some potenza tyres on them, i think im not use to the steering atm, it feels a lil different from my other hondas i use to own..

    yups when i hit bumps it sorta goes to the side as well..
    Last edited by bblt; 06-02-2009 at 04:33 PM.

  12. #12
    Disabled Array
    Join Date
    Dec 2008
    Car:
    5thgen>jdc2r>dck20>eg>ep3
    Quote Originally Posted by denrie View Post
    u sure its not just torque steer? yeah i got an SRI in mine aswell and the stock intake is very restrictive...
    did u notice a difference after u put a SRI on it?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.