Oil Cooler

[Benson]

I've been running an generic cooler (15row) from justjap for over 3 years now on the race car. It costed only 150bucks!. If your good with shopping around you can get fittings and lines for pretty cheap. 15 row is more than enough. We are finding temps are a little too cool. Only 100 deg after 4 laps around Wakefield (supercharged engine). Usually 1/4 of the cooler is taped off.

[jyh888]

Thanks for the feedback guys, $1000 for an oil cooler?? Thats very expensive....

Im not planning to spend much on an oil cooler...any idea what size fittings i will require? If i install an oil pressure gauge, where does the sensor read from?

Will any of these kits on ebay be suitable?

http://cgi.ebay.com.au/OIL-COOLER-KI...item41532f1f4a

http://cgi.ebay.com.au/NEW-10-ROW-Un...item1c15115315

Im not looking for a large oil cooler core because the fn2r has very limited space to mount it

[na-118]

can get stainless steel fittings and lines made up for cheaper then that alex pm me

WOW! i liek that oil cooler cover!

I was in the same boat, gonna get an oil cooler, I went to EARLS in Silverwater, Sydney. They gave me all the parts needed. it was for roughly 1000$;



Spoke to my mechanic, he said better off buying a acutal bolt on oil cooler kit from Trust etc.