Results 1 to 4 of 4
  1. #1
    Member Array
    Join Date
    Dec 2009
    Car:
    smashed crx =]

    coilover adjustment EP3R

    hey guys was respraying my wheels n thought id muck around with my coilovers
    its got buddyclub racing spec coilovers

    i want to set it to its lowesttttt position it can go just for a foto n quick spin then bring it up to just above the tyre...

    anyway to clear things up coz im kinda noob with coilovers it has the spring on 1 part then a locking ring under that then 1 ring down on the bottem....if i want to go lower what do i adjust? i tryd adjusting the top 2 rings by cracking the 2nd 1 ( the 1 thats under the 1 thats under the spring) if that makes sense l0l then turned the spring up, then tryd down...didnt notice anything really....

    also to adjust the damper stiffnes do i tighten the nut on the top in the middle?

    sorry for being noob l0l

  2. #2
    Member Array
    Join Date
    Dec 2009
    Car:
    smashed crx =]
    no1 can reply?

  3. #3
    Account Disabled Array
    Join Date
    Apr 2009
    Location
    South Western Sydney
    Car:
    R32 Skyline
    You have to adjust the bottom ring to change the height. To change the spring rate the top 2 ring will change that.

  4. #4
    Member Array
    Join Date
    Dec 2009
    Car:
    smashed crx =]
    aw ok so if i compress my spring thats spring rate and then the bottem 1 is to lower....what about the rears theres only 2 there?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.