Hi Comp D15B4 - Will this work?

[CivtecEG]

im currently building myself a hi-comp d15b4, the heads complete im just trying to peice together what i can use for the bottom end in regards to pistons etc., ive been searching and cant seem to get a proper answer on what im able to use with the motor, it seems like there are plenty of different variants, i have a page from FJ distributors, ive tried contacting them with no luck, hopefully someone here is able to assist me

http://fjdistributors.com/product_in...roducts_id=139

thank you guys in advance.

[xclusive_eg8]

im pretty sure d15b4s are pretty much samething as d15b7 just its carby.....check into vitara and d16a6 pistons

[egb16b]

hi comp d15b4.. thats different. good stuff!

what did you do to the head so far??

[CivtecEG]

love the old school tech, dont see very many around, if i can get it to push out 130-140 horses i will be happy, head specs so far, full port and polish, .5mm oversized valves on the exhaust side, 5 angle valve grind on the inlet and three angle on the exhaust, decked 20thou and a custom cam, valve springs and retainers are also on order, looking to grab a pair of webbers or see how far i can modify the stock carbs only problem is all the emmisions rubbish attached to it. in regards to pistons d16a6 will work?

[~Sp33~]

im pretty sure d15b4s are pretty much samething as d15b7 just its carby.....check into vitara and d16a6 pistons

Vitara pistons drop the compression ridiculously.