fd horn not working

[itachi-kun]

hey guys, i changed my front bar to mugen rr
after taking off the stock bumper and putting the new one on
i realised the horn doesnt work no more
i asked the mechanic he said check the stock bumper, might be attached to it,
went home to check and its not on the stock bumper

mmmm

[xenonkuraz]

The horn is a little round plate looking thing that is mounted in front of the radiator. Check that the connections to it were not loosened when you changed over the bumper

[itachi-kun]

thanks ill check it out, gotta take off the front bar again then lawl

[itachi-kun]

is it meant to be right in front of the radiator?
, i just took off the plastic cover near the grill
i looked i dont see any round plate(horn) mmm

[curtis265]

Here's a DIY on how to replace it. It's quite straight forward - you might be able to figure out what to do from here.

Also try checking ur fuse.

[xenonkuraz]

That tutorial was an epic fail.

Pulled apart the whole front end just to replace the horn

[itachi-kun]

fuse is ok btw, yea gonna just replace it, how much and where?

[xenonkuraz]

If you're gonna replace it might as well get a better horn such as hella twin tones

[curtis265]

lololol did you do it? I thought it was a bit excessive too lawl

[xenonkuraz]

I myself have hella twin tones. Sounds awesome

[liquid23]

That happened to me when I got my RR front, I got a friend to check it. The RR front was actually pressing against the horn so it wouldn't make a noise. So just easy fix, turned it 90 degrees and it is done.

[DuffyFD]

That happened to me when I got my RR front, I got a friend to check it. The RR front was actually pressing against the horn so it wouldn't make a noise. So just easy fix, turned it 90 degrees and it is done.

Likewise when i fitted the RR front bumper had to relocate the horn.