Kit's Rb1..

[kit927]

BBK first, it will affect rim choice as you will find that you will be more restricted to full face rims rather than rims with dish.

Yea that was a concern i had..
i did ask the guy and he said a +35 offset rim would clear it..
i dont know if he's trustworthy or just want the business..!!
i might get the ap's first then and some spacers to make it clear the rx-8 rims..

[evolution]

LOL.. was thinkin if anyone would pick that up..!!
at first i jus cut everything except the intake pipe leaving a massive hole closed to the front of the pipe then i plastic welded it.. i was happy with it coz the car felt smoother and throttle was more responsive and was plannin to leave it that way..
until a frd came pass and said it looks S**T..!!
' it looks like some infection is growin on it..!! '
so i sanded it back down then got plastic putty to remould and shape it.. leave it to dry and repeat the sand, putty, moulding and shapin stage until it looked acceptable.. (it took me abt 5-6 goes before it look ok) waited for it to dry again then sanded it down till it was smooth and spray painted it..
sounds abit confusing aye..!!
excuse the rough explaination pm me if ur interested to try it urself..

Cheers
KIT

Hahhahah was intending to do it to when I find the time. Difference is after plugging up the hole, sand it down and then cover it with dry carbon vinyl so that it doesnt need to be so perfect. Just need to find a spare one first so that I have the option to revert to normal in the future.

Would like to know how you plastic welded the hole up and more close up pics please.

[evolution]

Yea that was a concern i had..
i did ask the guy and he said a +35 offset rim would clear it..
i dont know if he's trustworthy or just want the business..!!
i might get the ap's first then and some spacers to make it clear the rx-8 rims..

Depends on design. Mine already cleared with space to spare on my old +42 7.5 inch rim. Even more space on my current 8.5 +45 rim. But my BBK is a small 4 piston caliper. AusAccord also had to install spacers for his BBK although he's got the same spec rims because of the rim design. The RX8 rims is 7.5 +50?

Do you really need a 6pot? 4 pot is more than enough for everyday driving. Can save some $$.

[kit927]

evolution this is the closest i can find of the intake pipe..
i'll take it off sometime next week and get u a closer look at it..
its not perfect though but i think its good enough for now..

Kit

[kit927]

Depends on design. Mine already cleared with space to spare on my old +42 7.5 inch rim. Even more space on my current 8.5 +45 rim. But my BBK is a small 4 piston caliper. AusAccord also had to install spacers for his BBK although he's got the same spec rims because of the rim design. The RX8 rims is 7.5 +50?

Do you really need a 6pot? 4 pot is more than enough for everyday driving. Can save some $$.

yea they ar 18"x7.5"+50..



lol.. need wise no dont need it at all..!!
really the brake setup i've got now is more then enough..
im gettin it only for the looks..


Kit

[mr180sx]

Nice car man! I too have the same problem with the super wagons not going low enough. Might have to get new coilovers

[AusAccord]

Yea im actually lookin at a set of AP racing 6 Pot with 345mm disc setup..
thinkin rims or bbk first..
i forgot to get back to u on the body kit last time sorry..!!
would u be able to hook me up in a few months time..??

Cheers
KIT

did you say need body kit?!? here is a set ready for u and price is neg.....
http://www.ozhonda.com/forum/showthr...or-Odyssey-RB1

[AusAccord]

yea they ar 18"x7.5"+50..



lol.. need wise no dont need it at all..!!
really the brake setup i've got now is more then enough..
im gettin it only for the looks..


Kit

6pot is looking good on 19" and full 4pot will be good for 18" plus daily usage. any chance you can pm me yr contacts in getting AP as sourcing a set of CP5200 atm. Cheers!

last time my offset is +27 on 7.5" wide rim

[evolution]

evolution this is the closest i can find of the intake pipe..
i'll take it off sometime next week and get u a closer look at it..
its not perfect though but i think its good enough for now..

Kit

Looks pretty good. I'll know who to ask if I ever get around to doing mine.

did you say need body kit?!? here is a set ready for u and price is neg.....
http://www.ozhonda.com/forum/showthr...or-Odyssey-RB1

Aus, you need to change your signature to "Need a Genuine Mugen Bodykit?"

[AusAccord]

.... i would suggest to get used to 30-35mm drop then go to 50mm.. Thats wat i did to get my mrs used to the drop but still she tore my heart a couple of times scrapin the muffler......

OEM or aftermarket mufflers?!?

[Mobil1]

Hey all its been awhile!!
Mobil1 they ar stock calipers and this is an upgrade u should get.. huge difference

Bro are you referring to just changing the brake pads only?? coz thats what I'm planning to do, just the brake pads. Worth it?

[kit927]

6pot is looking good on 19" and full 4pot will be good for 18" plus daily usage. any chance you can pm me yr contacts in getting AP as sourcing a set of CP5200 atm. Cheers!

last time my offset is +27 on 7.5" wide rim

Andy my frd is shoppin around for me in HK..
so i dont know where he'll end up getting it..!!
but i originally saw the kit at SuperGT HK.. but when my frd went to get it for me
he said apart from the calipers everything else is DTM..!!
So didnt buy it now hes gettin a quote from AP Racing distributor in HK..
He's got his from them and it was same or similar price as SuperGT except the whole kit is made by AP..!!

Kit