Engine MOunts

[aurnob88]

How much to install new engine mounts on a DC2 INtegra with B18C2

[HmGLuCaS]

How much to install new engine mounts on a DC2 INtegra with B18C2

You could trying calling shops around and asking for a quote, however if u are after how much engine mounts cost. You could check out JDMyard as they have a range of engine mounts which could suit your needs.

[aurnob88]

more expensive than i thought it was, $500 for a set of mounts

[aurnob88]

http://www.ebay.com.au/itm/Acura-Int...ht_3813wt_1016

WOuld these do the job?

[dougie_504]

I paid $800 for the last set of OEM mounts for EF8 in Australia so consider yourself lucky!

And good luck changing that rear mount


What's wrong with your current ones?

[aurnob88]

I paid $800 for the last set of OEM mounts for EF8 in Australia so consider yourself lucky!

And good luck changing that rear mount


What's wrong with your current ones?

Their worn so the engine moves about during hard changes or clutch dropping

[dougie_504]

Are they cracked on the inserts? A little movement is necessary, and hard to measure...

[EG5]

Hardrace DC2 engine mount kit $365 pick up

[infurNOS]

Thought of saving some coin and installing yourself? If you are just changing the 3 (2 sides and 1 rear) it is pretty simple, it is just the rear one which is a bitch to get too because it is way under the Intake manifold. I had a set of Innovative Billet mounts (60A), wouldnt go any stiffer for street otherwise you will start noticing cracks in your dash and feel EVERY vibration your engine makes..

http://www.ebay.com/itm/INNOVATIVE-M...sories&vxp=mtr

[aurnob88]

if someone can help me out with the install as i dont have the right tools id be willing to pay some coin, anyone in ctown or nearby

[1900-hustler]

why not just take it to hannys man

i remember they changed out my engine mounts pretty quickly - i remember not paying a whole lot either (especially if you supply your own parts)

[aurnob88]

why not just take it to hannys man

i remember they changed out my engine mounts pretty quickly - i remember not paying a whole lot either (especially if you supply your own parts)

how much?