Page 1 of 2 12 LastLast
Results 1 to 12 of 13

Thread: ECU tuning

  1. #1

    ECU tuning

    Hello all,

    I have a JDM EP3R running completely bone stock except for a Mugen intake. I was just wondering if buying an ECU (e.g. KPro) and flash tuning my car at its current state would make any significant difference?

  2. #2
    Member Array
    Join Date
    Feb 2008
    Location
    Orange county
    Car:
    Pimpin rover
    Not with just an intake dude

    If you wanted exhaust and headers, do that, then consider tune

  3. #3
    Oh okay. Just wanted to keep my car a sleeper though, headers and exhaust would make it louder.

  4. #4
    Member Array
    Join Date
    Oct 2010
    Location
    Melbourne
    Car:
    Grocery getter
    Quote Originally Posted by CivicTypeR View Post
    Oh okay. Just wanted to keep my car a sleeper though, headers and exhaust would make it louder.
    loud if you vtak it, otherwise find an exhaust that is quiet down low and on idle.
    I don't even know anymore.

  5. #5
    The problem with tuning with minimal mods ie just Intake, you've only potentially derestricted the factory intake [Mugen intake should be an improvement from what I've seen] however on the other side of the power equation, the factory headers & exhaust [possibly your compliance CAT too] are bottlenecking the potential gains to be had by the intake. Result is the tune will only give you a more aggressive mapping against the factory's usually conservative tune.

    Like NeedVtec mentioned, there are exhaust [Headers don't amplify sound as much as exhaust] that are quite civilised like the FGK Legalis-R [Link] and the FGK RM01A [Link] is louder but not by that much =)
    Toda Racing AU | Shen * Speed Works | Jesse Streeter

  6. #6
    Ohh okay. Cheers

  7. #7
    Member Array
    Join Date
    Dec 2008
    Location
    835 Beaufort St
    Car:
    hondie 2000
    of course a tune is worth it, but as the others have said, you need other mods

    the Kpro IIRC has inbuilt settings for different mods so you should be able to tune/retune easily
    S P A M | W O R K S
    hehe.
    PHC


  8. #8
    I/H/E and then tune.
    most efficient order of doing things to get power out.
    still wont be anything extreme.

  9. #9
    ^

    Yup, like butterfingers said, its not like a massive jump in peak power or torque, but rather with factory limitations removed, the last factory restriction is the factory ECU and its mapping. With I/H/E, the factory's ECU will most likely be out of its parameter to automatically adjust to the mods, in fact depending on the ECU, you could be experiencing loss in power due to it retarding and running rich =|
    Toda Racing AU | Shen * Speed Works | Jesse Streeter

  10. #10
    How about jsut getting the intake and catbakc alone without headers? Will that cause any problems with tuning?

  11. #11
    wont cause problems
    i heard ep3 headers are pretty good already
    but you never know

  12. #12
    Quote Originally Posted by CivicTypeR View Post
    How about jsut getting the intake and catbakc alone without headers? Will that cause any problems with tuning?
    Still will make your car loud.
    EG

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3


Terms and Conditions
Ozhonda.com is in no way affiliated with the Honda motor company or Honda Australia in anyway whatsoever.