eg rotors

[michael_antoi]

are the rotors pressed on to the arm or are there screws to hold it in place..

how would you change rotors on an eg?

front ones that is

[michael_antoi]

http://www.ozhonda.com/forum/showthr...ighlight=brake

just found that

is it same/similar for the fronts?

[Andrew21]

Exactly the same for the front. Unscrew the two screws on the rotor, you may have to tap over the screw driver with a hammer first to unlock them, then unscrew, and take the caliper off. 5 Minute Job really.