Window Trim on 94 Accord

**94_Accord** · 05-02-2006 08:38 PM

hey all, the rubber surrounding on the outside of my drivers window has gone. it was loose on one side for some period of time and eventually the rubber trimming snapped off when i was putting my window down..

i just want to know if anyone knows whats involved in replacing this, and what needs to come off / out in order to fix.

thanks

the pic below is the best i have to try show you all what i mean, notice the trimming on the outside of the drivers window is gone.

**j-specAccord** · 05-02-2006 08:57 PM

haha same thing happened to me. take you door trim off and pull the rubber insert out and get a fresh one from either a wrekers or brand new from a dealer/parts store

**94_Accord** · 06-02-2006 01:38 AM

how long did it take u, once u had all the tools required.. and also ive neva taken the door trim off, which sections should i be pulling out from first?

**j-specAccord** · 06-02-2006 07:47 PM

the door trim is real simple, juz unscrew the lil screw in the handle and the one holding the door latch then juz pop the card off from around the edge. dont worry bout breaking anything it juz pops off. then voila! you can access your seals

**94_Accord** · 07-02-2006 05:54 AM

Originally Posted by j-specAccord

the door trim is real simple, juz unscrew the lil screw in the handle and the one holding the door latch then juz pop the card off from around the edge. dont worry bout breaking anything it juz pops off. then voila! you can access your seals

champion.. thanks for the help buddy!