short shifters ??

[SIR GSR]

What sort of prices are we looking at for the kits though? And how long did it take to install? Looked pretty straight forward so should only take about 20 mins right?

[wynode]

takes a bit longer than 20 mins......Only because getting underthe car is a hassle. If you have a hoist.....then prob 20 mins

[sifoo]

Skunk2 by far the cheapest and best bang for buck shifter!.. Personally I think you should get a dual bend. Its sits the shifter closer to the driver its the only dual bend out the market I believe.

Im pretty happy with mine .. change your bushings when changing your shifter .. gives it a more solid feel

[EG5[KRT]]

most shifters for SOHC are only single bend ...

[SIR GSR]

I'm not interested in the closeness of it to me, I can adjust myself. I sit quite close anyway. I like the B & M one, but if anyone has prices on the selection that'd be great.

[R96P-EJ8]

most shifters for SOHC are only single bend ...

you can make the ones for DOHC to fit your car..well I've got the stock dc2 (integra vtir) shifter (dual bend) in my car (SOHC)

[SIR GSR]

Anyone have prices? Just so I can budget myself.

[TYPE-ONE]

i got b&m in my EG and C's in my EK. B&m very easy to use. Its not that hard to reach. C's is very precise but very $$

[jdm_kid]

i got b&m in my EG and C's in my EK. B&m very easy to use. Its not that hard to reach. C's is very precise but very $$

u pay what u get

[SIR GSR]

So what would I pay for each of them?

[TYPE-ONE]

I think B&m is about $120 Shipped And C's Is about $300 Shipped.

[terroristone]

single bend are no good, nothing worse than having to lean your left sholder forward to change gear, i modded the original, added 25mm to the bottom and for the 30 mins it took to do i dont think there is much that will match it. The good thing about modding your own is you can make it to your likings.
My opinion.
Andrew.