^^^^yeah man, wery hard to do, be heaps easier to mask it all off and paint it on the car.
But to answer you there are 8 (yes 8) small screws you have to get to from the inside, which means pulling everything appart (Headunit, a/c controls and p/w swithces).
The screws are 4 on the left side where the A/C and HU are (2 on either side) and 4 on the other side where the power window switches are, but unless you have very very small hand and a small screwdriver (or similar) they are going to be a b!tch to undo. I gave up on mine Hope this helps
Life is like a box of chocolates
It doesn't last as long for fat people
I needed to make a hole in that piece of trim to install a tacho (where the rear demister button is), so i thought id just take it off. I got the 4 screws on the right hand side undone then gave up on the left hand side. maybe if you had the right tools it might be ok, but yea i never got around to taking it off. i just made the hole with the trim still on. pain in the ass. As for painting it, masking it off will probably work if you take your time and do a good job. good luck with it
i would paint it in the car but it could get messy, as for plastic primer, black, then clear . my white interior would be stained!
i need to know exactly where the screws are?
and is there any other way to get to it?
alexx how did u get to those 4 screws? thru the dimming button?
ok so i found out that there are 8 screws attached.. i know how to get to the right side 4 screws anyone know how to take out the left's side 4 screws without taking the dash out?
.jpg)
Reply With Quote
lol
Hope this helps
Bookmarks