it will cost u a arm and a leg.. lol.. cause labour for taking out the gear box thats like about $200 already.. just taking it out and put it in.. and then labour for syncro to be replace and labour for taking ur gear box apart
could cost as much as $700 plus, because you dont know what condition the rest of the parts in their are like. you most deff want to replace the input shaft bearing and any other sus looking bearings. then all the other syncros.
the problem is you take your car some where to have it fixed and ask for a price on the repair, no one can give you an acurate price with out disasembling it 1st and quoting on damaged parts.
not worth repairing mate had the same problem payed 1500 do get all the syncros replaced and after a week it started to crunch again took it back to the place that worked on it and they would cover it under warranty casue they said he was flogging it i no for a fact that he wasnt.
we had a look around for another gearbox and found a few recond for around 500-800 might want to think about that this was for a ys1 lsd gbox for b16a so depending on what box u need will depend on what price they will be
we had a look around for another gearbox and found a few recond for around 500-800 might want to think about that this was for a ys1 lsd gbox for b16a so depending on what box u need will depend on what price they will be
everyone i rang is pricing the box without lsd for 700-900 .. and a reco box is 1200-1500 without lsd..
i just bought a second hand one and i had the same problem ..but it turned out to be low on g/box oil ... replaced it with redline and fixed the problems.
try changing the oil first!! then think of the worse case scenario!
i reckon syncros or selector fork bent...inside ur gearbox.change ur gearbox oil or just drain abit out and see if u can see any pieces of metal or fillings come out..then ull noe ur problem..
Reply With Quote
Originally Posted by bal
Bookmarks