Carbon Fibre Paint?

[panda[cRx]]

lmfao @ cf paint!

[AsH_]

spray the lip 2 match the cars colour...

i got it on my EG and it lookz mad...

[ACTI0NMAN-1]

stick on stuff from autobarn, then cover with 20coats of clear.

[28RAG]

http://www.modicoat.com/id41.htm

[Bayani]

There's a place that can dip your stuff and it will come out with a CF look.
Aquadip or something like that.

Their ads' are in AutoSalon, etc.

[28RAG]

There's a place that can dip your stuff and it will come out with a CF look.
Aquadip or something like that.

Their ads' are in AutoSalon, etc.

See the post above yours :P

[Bayani]

LOL; I did take a quick glance, thought they fabricated CF stuff I reread, and I see it's the same.

There is a few Australian places that do it, as far as I know mainly on the east cost.

Just giving the guy options

[Int3gra-T]

you can aqua dip most plastics 2 make it look carbon fibre n stuff like that
i havent heard much about the whole process but i seen some images.

[AUS2k]

have seen it done with air brush n thick weaved shade cloth it looked good but i think it would be near impossible 4 the DIYers if u want a good finish .
contact good air brush artist.

[Muzz]

http://www.ozhonda.com/forum/showthread.php?t=55501 this guys used the cabon fibre look alike film on his lip. Take a look

[EuroDude]

yep u can use mesh to get a carbon fibre effect, check out this site~
http://www.briansmodelcars.com/tutor...D=52&CurPage=1

[IZY-10]

Cant you like put a fly screen over it and spray it and would give it a funny looking carbon look?

this is what they usaully do. They firstly spray a under coat of the silver, then lay a material down (something like fly screen stuff) and spray over the top of it. Try it your self on a peice of wood or something to see how it turns out.