Firstly, i'm no n00b and know what i'm doing so don't tell me not to touch it, just haven't had the time to really look considering all the recent raining here in Sydney going on.
Now what i will be doing is replacing the dizzy cap on the B16A2 with a modified one for external coil.. all of which i have.
There are 2 plugs that plug into the distributor, i'm pretty sure it's the 2 wire harness i need to splice..
I'm also pretty sure one wire is black which is most likely the negative so am i safe to assume that the other is obviously +ve despite the wire colour?
I've done the same thing to an SR20 using an LX91 Crane Cams coil, luckily at the time we had readily available wiring/electrical diagrams which made this a non issue. I just don't want to use a multimeter on the ignition system to find out the hard way...
Thanks in advance!!!!
PS... the proposed setup for the ignition system is as follows:
- new leads
- new iridium plugs to be gapped 1.8mm
- External coil distributor cap
- MSD SS Blaster coil...
Search Keywords: Distributor, Dizzy, Wiring, Ignition Coil, Ignition Module, ICM
Related thread: http://www.ozhonda.com/forum/showthread.php?t=66559
Reply With Quote
Bookmarks